openwrt<轉載--openwrt框架分析 >

此次講講openwrt的結構.

1. 代碼上來看有幾個重要目錄package, target, build_root, bin, dl....

---build_dir/host目錄是創建工具鏈時的臨時目錄

---build_dir/toolchain-<arch>*是對應硬件的工具鏈的目錄

---staging_dir/toolchain-<arch>* 則是工具鏈的安裝位置

---target/Linux/<platform>目錄裏面是各個平臺(arch)的相關代碼

---target/linux/<platform>/config-3.10文件就是配置文件了

---dl目錄是'download'的縮寫, 在編譯前期，須要從網絡下載的數據包都會放在這個目錄下，這些軟件包的一個特色就是，會自動安裝在所編譯的固件中，也就是咱們make menuconfig的時候，爲固件配置的一些軟件包。若是咱們須要更改這些源碼包，只須要將更改好的源碼包打包成相同的名字放在這個目錄下，而後開始編譯便可。編譯時，會將軟件包解壓到build_dir目錄下。

---而在build_dir/目錄下進行解壓，編譯和打補丁等。

---package目錄裏面包含了咱們在配置文件裏設定的全部編譯好的軟件包。默認狀況下，會有默認選擇的軟件包。在openwrt中ipk就是一切, 咱們可使用

$ ./scripts/feeds update來對軟件包進行更新.

$ ./scripts/feeds search nmap 查找軟件包'nmap'

 Search results in feed ’packages’: 
 nmap       Network exploration and/or security auditing utility 

$ ./scripts/feeds install nmap 安裝'nmap'這個軟件

$ make package/symlinks  //估計意思是更新軟件源之類的

---bin目錄下生成了不少bin文件，根據不一樣的平臺來區分。另外bin/<platform>/package目錄，裏面有不少ipk後綴的文件，都是package目錄下的源碼在build_dir目錄下編譯後的生成的結果。

2. 新建本身的packages
對於本身新建的package，而這個package又不須要隨固件一塊兒安裝，換句話說，就是能夠當作一個可選軟件包的話。咱們能夠利用咱們的SDK環境來單獨編譯，編譯後會生成一個ipk的文件包。而後利用 opkg install xxx.ipk 來安裝這個軟件。

下面具體說下，如何編譯一個helloword的軟件包。
（1）首先，編寫helloworld程序
編寫helloworld.c
/****************
* Helloworld.c
* The most simplistic C program ever written.
* An epileptic monkey on crack could write this code.
*****************/
#include <stdio.h>
#include <unistd.h>
int main(void)
{
     printf("Hell! O' world, why won't my code compile?\n\n");
     return 0;
}

編寫Makefile文件
# build helloworld executable when user executes "make"
helloworld: helloworld.o
        $(CC) $(LDFLAGS) helloworld.o -o helloworld
helloworld.o: helloworld.c
        $(CC) $(CFLAGS) -c helloworld.c
# remove object files and executable when user executes "make clean"
clean:
        rm *.o helloworld
                                  
在這兩個文件的目錄下，執行make 應該能夠生成helloworld的可執行文件。執行helloworld後，可以打印出「Hell!O' world, why won't my code compile?」。 這一步，主要保證咱們的源程序是能夠正常編譯的。

下面咱們將其移植到OpenWRT上。
（2）將OpenWrt-SDK-brcm47xx-for-Linux-x86_64-gcc-4.3.3+cs_uClibc-0.9.30.1.tar.bz2解壓
tar –xvf OpenWrt-SDK-brcm47xx-for-Linux-x86_64-gcc-4.3.3+cs_uClibc-0.9.30.1.tar.bz2
（3）進入SDK
cd OpenWrt-SDK-brcm47xx-for-Linux-x86_64-gcc-4.3.3+cs_uClibc-0.9.30.1
能夠看到裏面的目錄結構跟咱們以前source的目錄結構基本相同，所須要編譯的軟件包，須要放置在package目錄下
（4）在package目錄下建立helloworld目錄
cd package
mkdir helloworld
cd helloworld
（5）建立src目錄，拷貝 helloworld文件
mkdir src
cp /home/wrt/test/helloworld.c src
cp /home/wrt/test/Makefile src
（6）在helloworld目錄下建立Makefile文件
這個Makefile文件是給OpenWRT讀的，而以前寫的那個Makefile文件是針對helloworld給編譯其讀的。兩個Makefile不在同一層目錄下。

touch Makefile
vim Makefile

Makefile文件模板內容以下：
##############################################
# OpenWrt Makefile for helloworld program
#
#
# Most of the variables used here are defined in
# the include directives below. We just need to
# specify a basic description of the package,
# where to build our program, where to find
# the source files, and where to install the
# compiled program on the router.
#
# Be very careful of spacing in this file.
# Indents should be tabs, not spaces, and
# there should be no trailing whitespace in
# lines that are not commented.
#
##############################################
include $(TOPDIR)/rules.mk
# Name and release number of this package
PKG_NAME:=helloworld
PKG_RELEASE:=1


# This specifies the directory where we're going to build the program. 
# The root build directory, $(BUILD_DIR), is by default the build_mipsel
# directory in your OpenWrt SDK directory
PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)


include $(INCLUDE_DIR)/package.mk
 
# Specify package information for this program.
# The variables defined here should be self explanatory.
# If you are running Kamikaze, delete the DESCRIPTION
# variable below and uncomment the Kamikaze define
# directive for the description below
define Package/helloworld
        SECTION:=utils
        CATEGORY:=Utilities
        TITLE:=Helloworld -- prints a snarky message
endef


# Uncomment portion below for Kamikaze and delete DESCRIPTION variable above
define Package/helloworld/description
        If you can't figure out what this program does, you're probably
        brain-dead and need immediate medical attention.
endef
 
# Specify what needs to be done to prepare for building the package.
# In our case, we need to copy the source files to the build directory.
# This is NOT the default.  The default uses the PKG_SOURCE_URL and the
# PKG_SOURCE which is not defined here to download the source from the web.
# In order to just build a simple program that we have just written, it is
# much easier to do it this way.
define Build/Prepare
        mkdir -p $(PKG_BUILD_DIR)
        $(CP) ./src/* $(PKG_BUILD_DIR)/
endef


# We do not need to define Build/Configure or Build/Compile directives
# The defaults are appropriate for compiling a simple program such as this one


# Specify where and how to install the program. Since we only have one file,
# the helloworld executable, install it by copying it to the /bin directory on
# the router. The $(1) variable represents the root directory on the router running
# OpenWrt. The $(INSTALL_DIR) variable contains a command to prepare the install
# directory if it does not already exist.  Likewise $(INSTALL_BIN) contains the
# command to copy the binary file from its current location (in our case the build
# directory) to the install directory.
define Package/helloworld/install
        $(INSTALL_DIR) $(1)/bin
        $(INSTALL_BIN) $(PKG_BUILD_DIR)/helloworld $(1)/bin/
endef


# This line executes the necessary commands to compile our program.
# The above define directives specify all the information needed, but this
# line calls BuildPackage which in turn actually uses this information to
# build a package.
$(eval $(call BuildPackage,helloworld))


（7）返回到SDK的根目錄
執行make進行編譯
編譯過程會在build_dir目錄下完成
編譯結果會放在 bin/[yourtarget]/package目錄下helloworld_1_bcm47xx.ipk
（8）上傳helloworld_1_bcm47xx.ipk
上傳helloworld_1_bcm47xx.ipk至路由器
執行# opkg install helloworld_1_bcm47xx.ipk
而後輸入hello而後按Tab鍵，發現openwrt中已經有helloworld可執行命令。
執行 helloworld命令來查看程序的效果。
Hell! O' world, why won't my code compile?

 

 

轉自：http://blog.csdn.net/kingvenll/article/details/27545221