Spring IoC源碼解析（二）——Bean的建立和初始化

上節回顧

上一節，咱們分析了Spring IoC容器是如何去初始化一個BeanFactory的，同時也分析了BeanFactory是如何去加載spring.xml中的的bean。本質上就是BeanFactory是如何去初始化BeanDefinnitionMap的的過程。接下來，咱們將進入IoC源碼的另外一個核心部分——建立並初始化Bean。

 

Spring介紹

Spring(http://spring.io/)是一個輕量級的Java 開發框架，同時也是輕量級的IoC和AOP的容器框架，主要是針對JavaBean的生命週期進行管理的輕量級容器，能夠單獨使用，也能夠和Struts框架，MyBatis框架等組合使用。

 

IoC介紹

IoC是什麼

Ioc—Inversion of Control，即「控制反轉」，不是什麼技術，而是一種設計思想。在Java開發中，Ioc意味着將你設計好的對象交給容器控制，而不是傳統的在你的對象內部直接控制。如何理解好Ioc呢？理解好Ioc的關鍵是要明確「誰控制誰，控制什麼，爲什麼是反轉（有反轉就應該有正轉了），哪些方面反轉了」，那咱們來深刻分析一下：

　　●誰控制誰，控制什麼：傳統Java SE程序設計，咱們直接在對象內部經過new進行建立對象，是程序主動去建立依賴對象；而IoC是有專門一個容器來建立這些對象，即由Ioc容器來控制對 象的建立；誰控制誰？固然是IoC 容器控制了對象；控制什麼？那就是主要控制了外部資源獲取（不僅是對象包括好比文件等）。

　　●爲什麼是反轉，哪些方面反轉了：有反轉就有正轉，傳統應用程序是由咱們本身在對象中主動控制去直接獲取依賴對象，也就是正轉；而反轉則是由容器來幫忙建立及注入依賴對象；爲什麼是反轉？由於由容器幫咱們查找及注入依賴對象，對象只是被動的接受依賴對象，因此是反轉；哪些方面反轉了？依賴對象的獲取被反轉了。

 

IoC能作什麼

IoC 不是一種技術，只是一種思想，一個重要的面向對象編程的法則，它能指導咱們如何設計出鬆耦合、更優良的程序。傳統應用程序都是由咱們在類內部主動建立依賴對象，從而致使類與類之間高耦合，難於測試；有了IoC容器後，把建立和查找依賴對象的控制權交給了容器，由容器進行注入組合對象，因此對象與對象之間是 鬆散耦合，這樣也方便測試，利於功能複用，更重要的是使得程序的整個體系結構變得很是靈活。

其實IoC對編程帶來的最大改變不是從代碼上，而是從思想上，發生了「主從換位」的變化。應用程序本來是老大，要獲取什麼資源都是主動出擊，可是在IoC/DI思想中，應用程序就變成被動的了，被動的等待IoC容器來建立並注入它所須要的資源了。

IoC很好的體現了面向對象設計法則之一—— 好萊塢法則：「別找咱們，咱們找你」；即由IoC容器幫對象找相應的依賴對象並注入，而不是由對象主動去找。

那麼，IoC容器究竟是如何從初始化完成的BeanFactory中對Bean進行建立並初始化的呢？接下來咱們就一探究竟。

 

源碼解析

準備工做

首先寫一個Spring的配置文件spring.xml，爲了方便測試，這裏面就只有一個名爲test的bean。

<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd">

    <bean id="test" class="org.study.spring.ioc.Test"></bean>
</beans>

編寫程序入口代碼，能夠直接打斷點進行調試。

ApplicationContext context = new ClassPathXmlApplicationContext("spring.xml");
Test bean = context.getBean("test", Test.class);

 

開始解析

開始源碼解析，緊接着上一節，首先進入AbstractApplicationContext.java的refresh方法，這一節咱們重點來看裏面的invokeBeanFactoryPostProcessors方法。

@Override
	public void refresh() throws BeansException, IllegalStateException {
		synchronized (this.startupShutdownMonitor) {
			// Prepare this context for refreshing.
			prepareRefresh();

			// Tell the subclass to refresh the internal bean factory.
			ConfigurableListableBeanFactory beanFactory = obtainFreshBeanFactory();

			// Prepare the bean factory for use in this context.
			prepareBeanFactory(beanFactory);

			try {
				// Allows post-processing of the bean factory in context subclasses.
				postProcessBeanFactory(beanFactory);

				// Invoke factory processors registered as beans in the context.
				invokeBeanFactoryPostProcessors(beanFactory);

				// Register bean processors that intercept bean creation.
				registerBeanPostProcessors(beanFactory);

				// Initialize message source for this context.
				initMessageSource();

				// Initialize event multicaster for this context.
				initApplicationEventMulticaster();

				// Initialize other special beans in specific context subclasses.
				onRefresh();

				// Check for listener beans and register them.
				registerListeners();

				// Instantiate all remaining (non-lazy-init) singletons.
				finishBeanFactoryInitialization(beanFactory);

				// Last step: publish corresponding event.
				finishRefresh();
			}

			catch (BeansException ex) {
				if (logger.isWarnEnabled()) {
					logger.warn("Exception encountered during context initialization - " +
							"cancelling refresh attempt: " + ex);
				}

				// Destroy already created singletons to avoid dangling resources.
				destroyBeans();

				// Reset 'active' flag.
				cancelRefresh(ex);

				// Propagate exception to caller.
				throw ex;
			}

			finally {
				// Reset common introspection caches in Spring's core, since we
				// might not ever need metadata for singleton beans anymore...
				resetCommonCaches();
			}
		}
	}

進入invokeBeanFactoryPostProcessors方法

/**
	 * Instantiate and invoke all registered BeanFactoryPostProcessor beans,
	 * respecting explicit order if given.
	 * <p>Must be called before singleton instantiation.
	 */
	protected void invokeBeanFactoryPostProcessors(ConfigurableListableBeanFactory beanFactory) {
		PostProcessorRegistrationDelegate.invokeBeanFactoryPostProcessors(beanFactory, getBeanFactoryPostProcessors());

		// Detect a LoadTimeWeaver and prepare for weaving, if found in the meantime
		// (e.g. through an @Bean method registered by ConfigurationClassPostProcessor)
		if (beanFactory.getTempClassLoader() == null && beanFactory.containsBean(LOAD_TIME_WEAVER_BEAN_NAME)) {
			beanFactory.addBeanPostProcessor(new LoadTimeWeaverAwareProcessor(beanFactory));
			beanFactory.setTempClassLoader(new ContextTypeMatchClassLoader(beanFactory.getBeanClassLoader()));
		}
	}

打開PostProcessorRegistrationDelegate類中的invokeBeanFactoryPostProcessors方法，能夠看到，這個方法裏有不少內容，這裏咱們只分析最關鍵的部分。從本質上來講，該方法就是去執行BeanFactoryPostProcessor這個接口中的方法去的，上面代碼註釋也清楚的寫到若是想先執行BeanFactoryPostProcessor這個接口的方法，必須先去實例化實現這個接口的Bean,也就是getBean這個方法。

public static void invokeBeanFactoryPostProcessors(
			ConfigurableListableBeanFactory beanFactory, List<BeanFactoryPostProcessor> beanFactoryPostProcessors) {

		// Invoke BeanDefinitionRegistryPostProcessors first, if any.
		Set<String> processedBeans = new HashSet<>();

		if (beanFactory instanceof BeanDefinitionRegistry) {
			BeanDefinitionRegistry registry = (BeanDefinitionRegistry) beanFactory;
			List<BeanFactoryPostProcessor> regularPostProcessors = new LinkedList<>();
			List<BeanDefinitionRegistryPostProcessor> registryPostProcessors =
					new LinkedList<>();

			for (BeanFactoryPostProcessor postProcessor : beanFactoryPostProcessors) {
				if (postProcessor instanceof BeanDefinitionRegistryPostProcessor) {
					BeanDefinitionRegistryPostProcessor registryPostProcessor =
							(BeanDefinitionRegistryPostProcessor) postProcessor;
					registryPostProcessor.postProcessBeanDefinitionRegistry(registry);
					registryPostProcessors.add(registryPostProcessor);
				}
				else {
					regularPostProcessors.add(postProcessor);
				}
			}

			// Do not initialize FactoryBeans here: We need to leave all regular beans
			// uninitialized to let the bean factory post-processors apply to them!
			// Separate between BeanDefinitionRegistryPostProcessors that implement
			// PriorityOrdered, Ordered, and the rest.
			String[] postProcessorNames =
					beanFactory.getBeanNamesForType(BeanDefinitionRegistryPostProcessor.class, true, false);

			// First, invoke the BeanDefinitionRegistryPostProcessors that implement PriorityOrdered.
			List<BeanDefinitionRegistryPostProcessor> priorityOrderedPostProcessors = new ArrayList<>();
			for (String ppName : postProcessorNames) {
				if (beanFactory.isTypeMatch(ppName, PriorityOrdered.class)) {
					priorityOrderedPostProcessors.add(beanFactory.getBean(ppName, BeanDefinitionRegistryPostProcessor.class));
					processedBeans.add(ppName);
				}
			}
			sortPostProcessors(beanFactory, priorityOrderedPostProcessors);
			registryPostProcessors.addAll(priorityOrderedPostProcessors);
			invokeBeanDefinitionRegistryPostProcessors(priorityOrderedPostProcessors, registry);

			// Next, invoke the BeanDefinitionRegistryPostProcessors that implement Ordered.
			postProcessorNames = beanFactory.getBeanNamesForType(BeanDefinitionRegistryPostProcessor.class, true, false);
			List<BeanDefinitionRegistryPostProcessor> orderedPostProcessors = new ArrayList<>();
			for (String ppName : postProcessorNames) {
				if (!processedBeans.contains(ppName) && beanFactory.isTypeMatch(ppName, Ordered.class)) {
					orderedPostProcessors.add(beanFactory.getBean(ppName, BeanDefinitionRegistryPostProcessor.class));
					processedBeans.add(ppName);
				}
			}
			sortPostProcessors(beanFactory, orderedPostProcessors);
			registryPostProcessors.addAll(orderedPostProcessors);
			invokeBeanDefinitionRegistryPostProcessors(orderedPostProcessors, registry);

			// Finally, invoke all other BeanDefinitionRegistryPostProcessors until no further ones appear.
			boolean reiterate = true;
			while (reiterate) {
				reiterate = false;
				postProcessorNames = beanFactory.getBeanNamesForType(BeanDefinitionRegistryPostProcessor.class, true, false);
				for (String ppName : postProcessorNames) {
					if (!processedBeans.contains(ppName)) {
						BeanDefinitionRegistryPostProcessor pp = beanFactory.getBean(ppName, BeanDefinitionRegistryPostProcessor.class);
						registryPostProcessors.add(pp);
						processedBeans.add(ppName);
						pp.postProcessBeanDefinitionRegistry(registry);
						reiterate = true;
					}
				}
			}

			// Now, invoke the postProcessBeanFactory callback of all processors handled so far.
			invokeBeanFactoryPostProcessors(registryPostProcessors, beanFactory);
			invokeBeanFactoryPostProcessors(regularPostProcessors, beanFactory);
		}

		else {
			// Invoke factory processors registered with the context instance.
			invokeBeanFactoryPostProcessors(beanFactoryPostProcessors, beanFactory);
		}

		// Do not initialize FactoryBeans here: We need to leave all regular beans
		// uninitialized to let the bean factory post-processors apply to them!
		String[] postProcessorNames =
				beanFactory.getBeanNamesForType(BeanFactoryPostProcessor.class, true, false);

		// Separate between BeanFactoryPostProcessors that implement PriorityOrdered,
		// Ordered, and the rest.
		List<BeanFactoryPostProcessor> priorityOrderedPostProcessors = new ArrayList<>();
		List<String> orderedPostProcessorNames = new ArrayList<>();
		List<String> nonOrderedPostProcessorNames = new ArrayList<>();
		for (String ppName : postProcessorNames) {
			if (processedBeans.contains(ppName)) {
				// skip - already processed in first phase above
			}
			else if (beanFactory.isTypeMatch(ppName, PriorityOrdered.class)) {
				priorityOrderedPostProcessors.add(beanFactory.getBean(ppName, BeanFactoryPostProcessor.class));
			}
			else if (beanFactory.isTypeMatch(ppName, Ordered.class)) {
				orderedPostProcessorNames.add(ppName);
			}
			else {
				nonOrderedPostProcessorNames.add(ppName);
			}
		}

		// First, invoke the BeanFactoryPostProcessors that implement PriorityOrdered.
		sortPostProcessors(beanFactory, priorityOrderedPostProcessors);
		invokeBeanFactoryPostProcessors(priorityOrderedPostProcessors, beanFactory);

		// Next, invoke the BeanFactoryPostProcessors that implement Ordered.
		List<BeanFactoryPostProcessor> orderedPostProcessors = new ArrayList<>();
		for (String postProcessorName : orderedPostProcessorNames) {
			orderedPostProcessors.add(beanFactory.getBean(postProcessorName, BeanFactoryPostProcessor.class));
		}
		sortPostProcessors(beanFactory, orderedPostProcessors);
		invokeBeanFactoryPostProcessors(orderedPostProcessors, beanFactory);

		// Finally, invoke all other BeanFactoryPostProcessors.
		List<BeanFactoryPostProcessor> nonOrderedPostProcessors = new ArrayList<>();
		for (String postProcessorName : nonOrderedPostProcessorNames) {
			nonOrderedPostProcessors.add(beanFactory.getBean(postProcessorName, BeanFactoryPostProcessor.class));
		}
		invokeBeanFactoryPostProcessors(nonOrderedPostProcessors, beanFactory);

		// Clear cached merged bean definitions since the post-processors might have
		// modified the original metadata, e.g. replacing placeholders in values...
		beanFactory.clearMetadataCache();
	}

接下來進入AbstractBeanFactory.java類中的doGetBean方法，這個方法的具體實現能夠分爲三個部分：

第一部分，首先先去singleton緩存中去找實例。因爲咱們例子中沒有把咱們的bean手動放入singletonObjects這個Map裏面去，因此這裏確定沒找到。

第二部分，而後是去獲取該BeanFactory父Factory，但願從這些Factory中獲取，若是該Beanfactory有父類，則但願用父類去實例化該bean，相似於JVM類加載的雙親委派機制。因爲咱們例子中的的Beanfactory爲null，因此暫不討論這種狀況。

第三部分，這一部分是咱們關注的重點，這裏咱們將這一大部分再分爲三個小的部分來進行分析：

1. 先將目前的bean標記爲的正在建立
2. 再獲取根據beanName獲得對應bean在beanfactory中的beanDefinitionMap的BeanDefinition（上一節初始化beanFactory時存入的），而後去獲取這個bean依賴的bean。若是依賴的bean尚未建立，則先建立依賴的bean，進行遞歸調用（這就是依賴注入Dependence Injection）。若是找不到依賴，則忽略。
3. 最後若是是單例（Spring默認是單例），則調用createBean()這個方法進行Bean的建立。

/**
	 * Return an instance, which may be shared or independent, of the specified bean.
	 * @param name the name of the bean to retrieve
	 * @param requiredType the required type of the bean to retrieve
	 * @param args arguments to use when creating a bean instance using explicit arguments
	 * (only applied when creating a new instance as opposed to retrieving an existing one)
	 * @param typeCheckOnly whether the instance is obtained for a type check,
	 * not for actual use
	 * @return an instance of the bean
	 * @throws BeansException if the bean could not be created
	 */
	@SuppressWarnings("unchecked")
	protected <T> T doGetBean(
			final String name, final Class<T> requiredType, final Object[] args, boolean typeCheckOnly)
			throws BeansException {

		final String beanName = transformedBeanName(name);
		Object bean;

		// Eagerly check singleton cache for manually registered singletons.
		Object sharedInstance = getSingleton(beanName);
		if (sharedInstance != null && args == null) {
			if (logger.isDebugEnabled()) {
				if (isSingletonCurrentlyInCreation(beanName)) {
					logger.debug("Returning eagerly cached instance of singleton bean '" + beanName +
							"' that is not fully initialized yet - a consequence of a circular reference");
				}
				else {
					logger.debug("Returning cached instance of singleton bean '" + beanName + "'");
				}
			}
			bean = getObjectForBeanInstance(sharedInstance, name, beanName, null);
		}

		else {
			// Fail if we're already creating this bean instance:
			// We're assumably within a circular reference.
			if (isPrototypeCurrentlyInCreation(beanName)) {
				throw new BeanCurrentlyInCreationException(beanName);
			}

			// Check if bean definition exists in this factory.
			BeanFactory parentBeanFactory = getParentBeanFactory();
			if (parentBeanFactory != null && !containsBeanDefinition(beanName)) {
				// Not found -> check parent.
				String nameToLookup = originalBeanName(name);
				if (args != null) {
					// Delegation to parent with explicit args.
					return (T) parentBeanFactory.getBean(nameToLookup, args);
				}
				else {
					// No args -> delegate to standard getBean method.
					return parentBeanFactory.getBean(nameToLookup, requiredType);
				}
			}

			if (!typeCheckOnly) {
				markBeanAsCreated(beanName);
			}

			try {
				final RootBeanDefinition mbd = getMergedLocalBeanDefinition(beanName);
				checkMergedBeanDefinition(mbd, beanName, args);

				// Guarantee initialization of beans that the current bean depends on.
				String[] dependsOn = mbd.getDependsOn();
				if (dependsOn != null) {
					for (String dependsOnBean : dependsOn) {
						if (isDependent(beanName, dependsOnBean)) {
							throw new BeanCreationException(mbd.getResourceDescription(), beanName,
									"Circular depends-on relationship between '" + beanName + "' and '" + dependsOnBean + "'");
						}
						registerDependentBean(dependsOnBean, beanName);
						getBean(dependsOnBean);
					}
				}

				// Create bean instance.
				if (mbd.isSingleton()) {
					sharedInstance = getSingleton(beanName, new ObjectFactory<Object>() {
						@Override
						public Object getObject() throws BeansException {
							try {
								return createBean(beanName, mbd, args);
							}
							catch (BeansException ex) {
								// Explicitly remove instance from singleton cache: It might have been put there
								// eagerly by the creation process, to allow for circular reference resolution.
								// Also remove any beans that received a temporary reference to the bean.
								destroySingleton(beanName);
								throw ex;
							}
						}
					});
					bean = getObjectForBeanInstance(sharedInstance, name, beanName, mbd);
				}

				else if (mbd.isPrototype()) {
					// It's a prototype -> create a new instance.
					Object prototypeInstance = null;
					try {
						beforePrototypeCreation(beanName);
						prototypeInstance = createBean(beanName, mbd, args);
					}
					finally {
						afterPrototypeCreation(beanName);
					}
					bean = getObjectForBeanInstance(prototypeInstance, name, beanName, mbd);
				}

				else {
					String scopeName = mbd.getScope();
					final Scope scope = this.scopes.get(scopeName);
					if (scope == null) {
						throw new IllegalStateException("No Scope registered for scope name '" + scopeName + "'");
					}
					try {
						Object scopedInstance = scope.get(beanName, new ObjectFactory<Object>() {
							@Override
							public Object getObject() throws BeansException {
								beforePrototypeCreation(beanName);
								try {
									return createBean(beanName, mbd, args);
								}
								finally {
									afterPrototypeCreation(beanName);
								}
							}
						});
						bean = getObjectForBeanInstance(scopedInstance, name, beanName, mbd);
					}
					catch (IllegalStateException ex) {
						throw new BeanCreationException(beanName,
								"Scope '" + scopeName + "' is not active for the current thread; consider " +
								"defining a scoped proxy for this bean if you intend to refer to it from a singleton",
								ex);
					}
				}
			}
			catch (BeansException ex) {
				cleanupAfterBeanCreationFailure(beanName);
				throw ex;
			}
		}

進入AbstractAutowireCapableBeanFactory.java類的createBean方法，這裏面能夠分爲四個部分：

第一部分：確保該bean的class是真實存在的，也就是該bean是能夠classload能夠找到加載的

第二部分：準備方法的重寫

第三部分：能夠看到，這邊出現了一個return，也就是說這邊能夠返回bean了。但看註釋：Give BeanPostProcessors a chance to return a proxy instead of the target bean instance. 這樣就很清晰了，BeanPostProcessor這個接口是能夠臨時修改bean的，優先級高於正常實例化bean的，若是beanPostProcessor能返回，則直接返回了。

第四部分：調用doCreateBean方法開始對bean進行建立

/**
	 * Central method of this class: creates a bean instance,
	 * populates the bean instance, applies post-processors, etc.
	 * @see #doCreateBean
	 */
	@Override
	protected Object createBean(String beanName, RootBeanDefinition mbd, Object[] args) throws BeanCreationException {
		if (logger.isDebugEnabled()) {
			logger.debug("Creating instance of bean '" + beanName + "'");
		}
		RootBeanDefinition mbdToUse = mbd;

		// Make sure bean class is actually resolved at this point, and
		// clone the bean definition in case of a dynamically resolved Class
		// which cannot be stored in the shared merged bean definition.
		Class<?> resolvedClass = resolveBeanClass(mbd, beanName);
		if (resolvedClass != null && !mbd.hasBeanClass() && mbd.getBeanClassName() != null) {
			mbdToUse = new RootBeanDefinition(mbd);
			mbdToUse.setBeanClass(resolvedClass);
		}

		// Prepare method overrides.
		try {
			mbdToUse.prepareMethodOverrides();
		}
		catch (BeanDefinitionValidationException ex) {
			throw new BeanDefinitionStoreException(mbdToUse.getResourceDescription(),
					beanName, "Validation of method overrides failed", ex);
		}

		try {
			// Give BeanPostProcessors a chance to return a proxy instead of the target bean instance.
			Object bean = resolveBeforeInstantiation(beanName, mbdToUse);
			if (bean != null) {
				return bean;
			}
		}
		catch (Throwable ex) {
			throw new BeanCreationException(mbdToUse.getResourceDescription(), beanName,
					"BeanPostProcessor before instantiation of bean failed", ex);
		}

		Object beanInstance = doCreateBean(beanName, mbdToUse, args);
		if (logger.isDebugEnabled()) {
			logger.debug("Finished creating instance of bean '" + beanName + "'");
		}
		return beanInstance;
	}

打開doCreateBean方法，在這個方法裏會作兩件事：一是經過createBeanInstance這個方法建立bean，二是經過initializeBean方法初始化bean。先看看createBeanInstance這個方法裏有什麼玄機。

/**
	 * Actually create the specified bean. Pre-creation processing has already happened
	 * at this point, e.g. checking {@code postProcessBeforeInstantiation} callbacks.
	 * <p>Differentiates between default bean instantiation, use of a
	 * factory method, and autowiring a constructor.
	 * @param beanName the name of the bean
	 * @param mbd the merged bean definition for the bean
	 * @param args explicit arguments to use for constructor or factory method invocation
	 * @return a new instance of the bean
	 * @throws BeanCreationException if the bean could not be created
	 * @see #instantiateBean
	 * @see #instantiateUsingFactoryMethod
	 * @see #autowireConstructor
	 */
	protected Object doCreateBean(final String beanName, final RootBeanDefinition mbd, final Object[] args) {
		// Instantiate the bean.
		BeanWrapper instanceWrapper = null;
		if (mbd.isSingleton()) {
			instanceWrapper = this.factoryBeanInstanceCache.remove(beanName);
		}
		if (instanceWrapper == null) {
			instanceWrapper = createBeanInstance(beanName, mbd, args);
		}
		final Object bean = (instanceWrapper != null ? instanceWrapper.getWrappedInstance() : null);
		Class<?> beanType = (instanceWrapper != null ? instanceWrapper.getWrappedClass() : null);

		// Allow post-processors to modify the merged bean definition.
		synchronized (mbd.postProcessingLock) {
			if (!mbd.postProcessed) {
				applyMergedBeanDefinitionPostProcessors(mbd, beanType, beanName);
				mbd.postProcessed = true;
			}
		}

		// Eagerly cache singletons to be able to resolve circular references
		// even when triggered by lifecycle interfaces like BeanFactoryAware.
		boolean earlySingletonExposure = (mbd.isSingleton() && this.allowCircularReferences &&
				isSingletonCurrentlyInCreation(beanName));
		if (earlySingletonExposure) {
			if (logger.isDebugEnabled()) {
				logger.debug("Eagerly caching bean '" + beanName +
						"' to allow for resolving potential circular references");
			}
			addSingletonFactory(beanName, new ObjectFactory<Object>() {
				@Override
				public Object getObject() throws BeansException {
					return getEarlyBeanReference(beanName, mbd, bean);
				}
			});
		}

		// Initialize the bean instance.
		Object exposedObject = bean;
		try {
			populateBean(beanName, mbd, instanceWrapper);
			if (exposedObject != null) {
				exposedObject = initializeBean(beanName, exposedObject, mbd);
			}
		}
		catch (Throwable ex) {
			if (ex instanceof BeanCreationException && beanName.equals(((BeanCreationException) ex).getBeanName())) {
				throw (BeanCreationException) ex;
			}
			else {
				throw new BeanCreationException(mbd.getResourceDescription(), beanName, "Initialization of bean failed", ex);
			}
		}

		if (earlySingletonExposure) {
			Object earlySingletonReference = getSingleton(beanName, false);
			if (earlySingletonReference != null) {
				if (exposedObject == bean) {
					exposedObject = earlySingletonReference;
				}
				else if (!this.allowRawInjectionDespiteWrapping && hasDependentBean(beanName)) {
					String[] dependentBeans = getDependentBeans(beanName);
					Set<String> actualDependentBeans = new LinkedHashSet<>(dependentBeans.length);
					for (String dependentBean : dependentBeans) {
						if (!removeSingletonIfCreatedForTypeCheckOnly(dependentBean)) {
							actualDependentBeans.add(dependentBean);
						}
					}
					if (!actualDependentBeans.isEmpty()) {
						throw new BeanCurrentlyInCreationException(beanName,
								"Bean with name '" + beanName + "' has been injected into other beans [" +
								StringUtils.collectionToCommaDelimitedString(actualDependentBeans) +
								"] in its raw version as part of a circular reference, but has eventually been " +
								"wrapped. This means that said other beans do not use the final version of the " +
								"bean. This is often the result of over-eager type matching - consider using " +
								"'getBeanNamesOfType' with the 'allowEagerInit' flag turned off, for example.");
					}
				}
			}
		}

		// Register bean as disposable.
		try {
			registerDisposableBeanIfNecessary(beanName, bean, mbd);
		}
		catch (BeanDefinitionValidationException ex) {
			throw new BeanCreationException(mbd.getResourceDescription(), beanName, "Invalid destruction signature", ex);
		}

		return exposedObject;
	}

 

建立Bean

進入createBeanInstance方法，這塊代碼主要是再次對bean作安全檢查並肯定該bean有默認的構造函數。直接看這個方法最後一行，調用instantiateBean方法並返回方法的結果。

/**
	 * Create a new instance for the specified bean, using an appropriate instantiation strategy:
	 * factory method, constructor autowiring, or simple instantiation.
	 * @param beanName the name of the bean
	 * @param mbd the bean definition for the bean
	 * @param args explicit arguments to use for constructor or factory method invocation
	 * @return BeanWrapper for the new instance
	 * @see #instantiateUsingFactoryMethod
	 * @see #autowireConstructor
	 * @see #instantiateBean
	 */
	protected BeanWrapper createBeanInstance(String beanName, RootBeanDefinition mbd, Object[] args) {
		// Make sure bean class is actually resolved at this point.
		Class<?> beanClass = resolveBeanClass(mbd, beanName);

		if (beanClass != null && !Modifier.isPublic(beanClass.getModifiers()) && !mbd.isNonPublicAccessAllowed()) {
			throw new BeanCreationException(mbd.getResourceDescription(), beanName,
					"Bean class isn't public, and non-public access not allowed: " + beanClass.getName());
		}

		if (mbd.getFactoryMethodName() != null)  {
			return instantiateUsingFactoryMethod(beanName, mbd, args);
		}

		// Shortcut when re-creating the same bean...
		boolean resolved = false;
		boolean autowireNecessary = false;
		if (args == null) {
			synchronized (mbd.constructorArgumentLock) {
				if (mbd.resolvedConstructorOrFactoryMethod != null) {
					resolved = true;
					autowireNecessary = mbd.constructorArgumentsResolved;
				}
			}
		}
		if (resolved) {
			if (autowireNecessary) {
				return autowireConstructor(beanName, mbd, null, null);
			}
			else {
				return instantiateBean(beanName, mbd);
			}
		}

		// Need to determine the constructor...
		Constructor<?>[] ctors = determineConstructorsFromBeanPostProcessors(beanClass, beanName);
		if (ctors != null ||
				mbd.getResolvedAutowireMode() == RootBeanDefinition.AUTOWIRE_CONSTRUCTOR ||
				mbd.hasConstructorArgumentValues() || !ObjectUtils.isEmpty(args))  {
			return autowireConstructor(beanName, mbd, ctors, args);
		}

		// No special handling: simply use no-arg constructor.
		return instantiateBean(beanName, mbd);
	}

接着進入instantiateBean方法查看

/**
	 * Instantiate the given bean using its default constructor.
	 * @param beanName the name of the bean
	 * @param mbd the bean definition for the bean
	 * @return BeanWrapper for the new instance
	 */
	protected BeanWrapper instantiateBean(final String beanName, final RootBeanDefinition mbd) {
		try {
			Object beanInstance;
			final BeanFactory parent = this;
			if (System.getSecurityManager() != null) {
				beanInstance = AccessController.doPrivileged(new PrivilegedAction<Object>() {
					@Override
					public Object run() {
						return getInstantiationStrategy().instantiate(mbd, beanName, parent);
					}
				}, getAccessControlContext());
			}
			else {
				beanInstance = getInstantiationStrategy().instantiate(mbd, beanName, parent);
			}
			BeanWrapper bw = new BeanWrapperImpl(beanInstance);
			initBeanWrapper(bw);
			return bw;
		}
		catch (Throwable ex) {
			throw new BeanCreationException(mbd.getResourceDescription(), beanName, "Instantiation of bean failed", ex);
		}
	}

再進入SimpleInstantiationStrategy.java的instantiate方法，咱們能夠看到，在這個方法裏，Spring經過反射的方法根據BeanDefinition建立出Bean的對象並返回。

@Override
	public Object instantiate(RootBeanDefinition bd, String beanName, BeanFactory owner) {
		// Don't override the class with CGLIB if no overrides.
		if (bd.getMethodOverrides().isEmpty()) {
			Constructor<?> constructorToUse;
			synchronized (bd.constructorArgumentLock) {
				constructorToUse = (Constructor<?>) bd.resolvedConstructorOrFactoryMethod;
				if (constructorToUse == null) {
					final Class<?> clazz = bd.getBeanClass();
					if (clazz.isInterface()) {
						throw new BeanInstantiationException(clazz, "Specified class is an interface");
					}
					try {
						if (System.getSecurityManager() != null) {
							constructorToUse = AccessController.doPrivileged(new PrivilegedExceptionAction<Constructor<?>>() {
								@Override
								public Constructor<?> run() throws Exception {
									return clazz.getDeclaredConstructor((Class[]) null);
								}
							});
						}
						else {
							constructorToUse =	clazz.getDeclaredConstructor((Class[]) null);
						}
						bd.resolvedConstructorOrFactoryMethod = constructorToUse;
					}
					catch (Throwable ex) {
						throw new BeanInstantiationException(clazz, "No default constructor found", ex);
					}
				}
			}
			return BeanUtils.instantiateClass(constructorToUse);
		}
		else {
			// Must generate CGLIB subclass.
			return instantiateWithMethodInjection(bd, beanName, owner);
		}
	}

以上是Bean的建立，接下來咱們看IoC容器是如何對Bean進行初始化的。

 

初始化Bean

讓咱們回到AbstractAutowireCapableBeanFactory.java類中的doCreateBean方法中，重點關注裏面的initializeBean方法。如今bean已經被建立了，開始初始化該bean。

/**
	 * Initialize the given bean instance, applying factory callbacks
	 * as well as init methods and bean post processors.
	 * <p>Called from {@link #createBean} for traditionally defined beans,
	 * and from {@link #initializeBean} for existing bean instances.
	 * @param beanName the bean name in the factory (for debugging purposes)
	 * @param bean the new bean instance we may need to initialize
	 * @param mbd the bean definition that the bean was created with
	 * (can also be {@code null}, if given an existing bean instance)
	 * @return the initialized bean instance (potentially wrapped)
	 * @see BeanNameAware
	 * @see BeanClassLoaderAware
	 * @see BeanFactoryAware
	 * @see #applyBeanPostProcessorsBeforeInitialization
	 * @see #invokeInitMethods
	 * @see #applyBeanPostProcessorsAfterInitialization
	 */
	protected Object initializeBean(final String beanName, final Object bean, RootBeanDefinition mbd) {
		if (System.getSecurityManager() != null) {
			AccessController.doPrivileged(new PrivilegedAction<Object>() {
				@Override
				public Object run() {
					invokeAwareMethods(beanName, bean);
					return null;
				}
			}, getAccessControlContext());
		}
		else {
			invokeAwareMethods(beanName, bean);
		}

		Object wrappedBean = bean;
		if (mbd == null || !mbd.isSynthetic()) {
			wrappedBean = applyBeanPostProcessorsBeforeInitialization(wrappedBean, beanName);
		}

		try {
			invokeInitMethods(beanName, wrappedBean, mbd);
		}
		catch (Throwable ex) {
			throw new BeanCreationException(
					(mbd != null ? mbd.getResourceDescription() : null),
					beanName, "Invocation of init method failed", ex);
		}

		if (mbd == null || !mbd.isSynthetic()) {
			wrappedBean = applyBeanPostProcessorsAfterInitialization(wrappedBean, beanName);
		}
		return wrappedBean;
	}

在這個方法中，先調用invokeAwareMethods方法用於加載相關資源（好比BeanName、BeanClassLoader、BeanFactory等資源）。

private void invokeAwareMethods(final String beanName, final Object bean) {
		if (bean instanceof Aware) {
			if (bean instanceof BeanNameAware) {
				((BeanNameAware) bean).setBeanName(beanName);
			}
			if (bean instanceof BeanClassLoaderAware) {
				((BeanClassLoaderAware) bean).setBeanClassLoader(getBeanClassLoader());
			}
			if (bean instanceof BeanFactoryAware) {
				((BeanFactoryAware) bean).setBeanFactory(AbstractAutowireCapableBeanFactory.this);
			}
		}
	}

再調用applyBeanPostProcessorsBeforeInitialization方法用於構造方法執行以前再次修改Bean（BeanPostProcessor接口）。

@Override
	public Object applyBeanPostProcessorsBeforeInitialization(Object existingBean, String beanName)
			throws BeansException {

		Object result = existingBean;
		for (BeanPostProcessor beanProcessor : getBeanPostProcessors()) {
			result = beanProcessor.postProcessBeforeInitialization(result, beanName);
			if (result == null) {
				return result;
			}
		}
		return result;
	}

而後經過invokeInitMethods調用自定義的初始化方法

/**
	 * Give a bean a chance to react now all its properties are set,
	 * and a chance to know about its owning bean factory (this object).
	 * This means checking whether the bean implements InitializingBean or defines
	 * a custom init method, and invoking the necessary callback(s) if it does.
	 * @param beanName the bean name in the factory (for debugging purposes)
	 * @param bean the new bean instance we may need to initialize
	 * @param mbd the merged bean definition that the bean was created with
	 * (can also be {@code null}, if given an existing bean instance)
	 * @throws Throwable if thrown by init methods or by the invocation process
	 * @see #invokeCustomInitMethod
	 */
	protected void invokeInitMethods(String beanName, final Object bean, RootBeanDefinition mbd)
			throws Throwable {

		boolean isInitializingBean = (bean instanceof InitializingBean);
		if (isInitializingBean && (mbd == null || !mbd.isExternallyManagedInitMethod("afterPropertiesSet"))) {
			if (logger.isDebugEnabled()) {
				logger.debug("Invoking afterPropertiesSet() on bean with name '" + beanName + "'");
			}
			if (System.getSecurityManager() != null) {
				try {
					AccessController.doPrivileged(new PrivilegedExceptionAction<Object>() {
						@Override
						public Object run() throws Exception {
							((InitializingBean) bean).afterPropertiesSet();
							return null;
						}
					}, getAccessControlContext());
				}
				catch (PrivilegedActionException pae) {
					throw pae.getException();
				}
			}
			else {
				((InitializingBean) bean).afterPropertiesSet();
			}
		}

		if (mbd != null) {
			String initMethodName = mbd.getInitMethodName();
			if (initMethodName != null && !(isInitializingBean && "afterPropertiesSet".equals(initMethodName)) &&
					!mbd.isExternallyManagedInitMethod(initMethodName)) {
				invokeCustomInitMethod(beanName, bean, mbd);
			}
		}
	}

再調用applyBeanPostProcessorsAfterInitialization方法用於構造方法執行以前再次修改Bean（BeanPostProcessor接口）。

@Override
	public Object applyBeanPostProcessorsAfterInitialization(Object existingBean, String beanName)
			throws BeansException {

		Object result = existingBean;
		for (BeanPostProcessor beanProcessor : getBeanPostProcessors()) {
			result = beanProcessor.postProcessAfterInitialization(result, beanName);
			if (result == null) {
				return result;
			}
		}
		return result;
	}

以上就完成了建立並初始化Bean的整個過程。

 

總結

經過此次源碼分析，咱們應該知道bean是怎麼被IoC容器所建立的了，也知道IoC容器是如何去初始化spring.xml中的的bean了。咱們來總結一下，整個過程最主要的就是AbstractAutowireCapableBeanFactory.java類中兩個方法，一是createBeanInstance方法，用於建立Bean，二是initializeBean方法，用於初始化Bean。這兩個方法須要仔細地分析和思考，若是還有不明白的地方，能夠對照着Spring的源碼本身動手理解一下，但願能對你們有所幫助。