1、介紹mysql
約束條件與數據類型的寬度同樣，都是可選參數sql
做用：用於保證數據的完整性和一致性session
主要分爲：ide
PRIMARY KEY (PK) #標識該字段爲該表的主角按，能夠惟一的表示記錄 POREIGN KEY (FK) #標識該字段爲該表的外鍵 NOT NULL #表示該字段不能爲空 UNIQUE KEY (UK) #標識該字段的值是惟一的 AUTO_INCREMENT #標識該字段的值自動增加（整數類型，並且爲主鍵） DEFAULT #該字段設置默認值 UNSIGNED #無符號 ZEROFILL #使用0填充
說明：spa
#1.是否容許爲空，默認NULL，可設置NOT NULL,字段不容許爲空，必賦值 #2.字段是否有默認值，缺省的默認值是NULL，若是想插入記錄時不給字段賦值，此字段使用默認值 sex enum('male','female') not null default 'male' # 必須爲正值（無符號）不容許爲空 默認時20 age int unsigned NOT NULL default 20 #30是否時key 主鍵 primary key 外鍵 foreign key 索引 （index，unique。。。）
2、not null 與default翻譯
是否可空，null標識空，非字符串code
not null - 不可空blog
null - 可空索引
默認值，建立列時能夠指定默認值，當插入數據時，若是未主動設置，則自動添加默認值ip
create table tb1（ nid int not null default 2， num int not null ）；
驗證：
mysql> create table t11(id int);# id字段默承認覺得空 Query OK, 0 rows affected (0.05 sec) mysql> desc t11; +-------+---------+------+-----+---------+-------+ | Field | Type | Null | Key | Default | Extra | +-------+---------+------+-----+---------+-------+ | id | int(11) | YES | | NULL | | +-------+---------+------+-----+---------+-------+ 1 row in set (0.03 sec) mysql> insert into t11 values(); #給t11表插一個空的值 Query OK, 1 row affected (0.00 sec) #查詢結果以下 mysql> select * from t11; +------+ | id | +------+ | NULL | +------+ 1 row in set (0.00 sec)
驗證2：
mysql> create table t12(id int not null);#設置字段id不爲空 Query OK, 0 rows affected (0.03 sec) mysql> desc t12; +-------+---------+------+-----+---------+-------+ | Field | Type | Null | Key | Default | Extra | +-------+---------+------+-----+---------+-------+ | id | int(11) | NO | | NULL | | +-------+---------+------+-----+---------+-------+ 1 row in set (0.01 sec) mysql> insert into t12 values();#不能插入空 ERROR 1364 (HY000): Field 'id' doesn't have a default value
驗證3：
mysql> create table student2( -> id int not null, -> name varchar(50) not null, -> age int(3) unsigned not null default 18, -> sex enum('male','female') default 'male', -> fav set('smoke','drink','tangtou') default 'drink,tangtou' -> ); Query OK, 0 rows affected (0.01 sec) # 只插入了not null約束條件的字段對應的值 mysql> insert into student2(id,name) values(1,'mjj'); Query OK, 1 row affected (0.00 sec) # 查詢結果以下 mysql> select * from student2; +----+------+-----+------+---------------+ | id | name | age | sex | fav | +----+------+-----+------+---------------+ | 1 | mjj | 18 | male | drink,tangtou | +----+------+-----+------+---------------+ 1 row in set (0.00 sec)
3.unique
中文翻譯：不一樣的。在MySQL中成爲單列惟一
舉例說明：建立公司部門表（每一個公司都有惟一的部門）。
mysql> create table department( -> id int, -> name char(10) -> ); Query OK, 0 rows affected (0.01 sec) mysql> insert into department values(1,'IT'),(2,'IT'); Query OK, 2 rows affected (0.00 sec) Records: 2 Duplicates: 0 Warnings: 0 mysql> select * from department; +------+------+ | id | name | +------+------+ | 1 | IT | | 2 | IT | +------+------+ 2 rows in set (0.00 sec) # 發現： 同時插入兩個IT部門也是能夠的，但這是不合理的，因此咱們要設置name字段爲unique 解決這種不合理的現象。
接下來，使用約束條件unique，來對公司部門的字段進行設置。
#第一種建立unique的方式 #例子1： create table department( id int, name char(10) unique ); mysql> insert into department values(1,'it'),(2,'it'); ERROR 1062 (23000): Duplicate entry 'it' for key 'name' #例子2： create table department( id int unique, name char(10) unique ); insert into department values(1,'it'),(2,'sale'); #第二種建立unique的方式 create table department( id int, name char(10) , unique(id), unique(name) ); insert into department values(1,'it'),(2,'sale');
聯合惟一：
# 建立services表 mysql> create table services( -> id int, -> ip char(15), -> port int, -> unique(id), -> unique(ip,port) -> ); Query OK, 0 rows affected (0.05 sec) mysql> desc services; +-------+----------+------+-----+---------+-------+ | Field | Type | Null | Key | Default | Extra | +-------+----------+------+-----+---------+-------+ | id | int(11) | YES | UNI | NULL | | | ip | char(15) | YES | MUL | NULL | | | port | int(11) | YES | | NULL | | +-------+----------+------+-----+---------+-------+ 3 rows in set (0.01 sec) #聯合惟一，只要兩列記錄，有一列不一樣，既符合聯合惟一的約束 mysql> insert into services values -> (1,'192,168,11,23',80), -> (2,'192,168,11,23',81), -> (3,'192,168,11,25',80); Query OK, 3 rows affected (0.01 sec) Records: 3 Duplicates: 0 Warnings: 0 mysql> select * from services; +------+---------------+------+ | id | ip | port | +------+---------------+------+ | 1 | 192,168,11,23 | 80 | | 2 | 192,168,11,23 | 81 | | 3 | 192,168,11,25 | 80 | +------+---------------+------+ 3 rows in set (0.00 sec) mysql> insert into services values (4,'192,168,11,23',80); ERROR 1062 (23000): Duplicate entry '192,168,11,23-80' for key 'ip'
4.primary key
一個表能夠：
單列作主鍵
多列作主鍵（複合主鍵）
約束：等價於 not null unique，字段的值不能爲空，且惟一
存儲引擎默認時（innodb）：對於innodb存儲引擎來講，一張表必須有一個主鍵
單列主鍵
# 建立t14表，爲id字段設置主鍵，惟一的不一樣的記錄 create table t14( id int primary key, name char(16) ); insert into t14 values (1,'xiaoma'), (2,'xiaohong'); mysql> insert into t14 values(2,'wxxx'); ERROR 1062 (23000): Duplicate entry '6' for key 'PRIMARY' # not null + unique的化學反應，至關於給id設置primary key create table t15( id int not null unique, name char(16) ); mysql> create table t15( -> id int not null unique, -> name char(16) -> ); Query OK, 0 rows affected (0.01 sec) mysql> desc t15; +-------+----------+------+-----+---------+-------+ | Field | Type | Null | Key | Default | Extra | +-------+----------+------+-----+---------+-------+ | id | int(11) | NO | PRI | NULL | | | name | char(16) | YES | | NULL | | +-------+----------+------+-----+---------+-------+ 2 rows in set (0.02 sec)
複合主鍵：
create table t16( ip char(15), port int, primary key(ip,port) ); insert into t16 values ('1.1.1.2',80), ('1.1.1.2',81);
5.auto_increment
約束：約束的字段爲自動增加，約束的字段必須同時被key約束
（重點）驗證：
# 建立student create table student( id int primary key auto_increment, name varchar(20), sex enum('male','female') default 'male' ); mysql> desc student; +-------+-----------------------+------+-----+---------+----------------+ | Field | Type | Null | Key | Default | Extra | +-------+-----------------------+------+-----+---------+----------------+ | id | int(11) | NO | PRI | NULL | auto_increment | | name | varchar(20) | YES | | NULL | | | sex | enum('male','female') | YES | | male | | +-------+-----------------------+------+-----+---------+----------------+ 3 rows in set (0.17 sec) #插入記錄 mysql> insert into student(name) values ('老白'),('小白'); Query OK, 2 rows affected (0.01 sec) Records: 2 Duplicates: 0 Warnings: 0 mysql> select * from student; +----+--------+------+ | id | name | sex | +----+--------+------+ | 1 | 老白 | male | | 2 | 小白 | male | +----+--------+------+ 2 rows in set (0.00 sec)
mysql> insert into student values(4,'asb','female'); Query OK, 1 row affected (0.00 sec) mysql> insert into student values(7,'wsb','female'); Query OK, 1 row affected (0.01 sec) mysql> select * from student; +----+--------+--------+ | id | name | sex | +----+--------+--------+ | 1 | 老白 | male | | 2 | 小白 | male | | 4 | asb | female | | 7 | wsb | female | +----+--------+--------+ 4 rows in set (0.00 sec) # 再次插入一條不指定id的記錄，會在以前的最後一條記錄繼續增加 mysql> insert into student(name) values ('大白'); Query OK, 1 row affected (0.00 sec) mysql> select * from student; +----+--------+--------+ | id | name | sex | +----+--------+--------+ | 1 | 老白 | male | | 2 | 小白 | male | | 4 | asb | female | | 7 | wsb | female | | 8 | 大白 | male | +----+--------+--------+ 5 rows in set (0.00 sec)
mysql> delete from student; Query OK, 5 rows affected (0.00 sec) mysql> select * from student; Empty set (0.00 sec) mysql> select * from student; Empty set (0.00 sec) mysql> insert into student(name) values('ysb'); Query OK, 1 row affected (0.01 sec) mysql> select * from student; +----+------+------+ | id | name | sex | +----+------+------+ | 9 | ysb | male | +----+------+------+ 1 row in set (0.00 sec) #應該用truncate清空表，比起delete一條一條地刪除記錄，truncate是直接清空表，在刪除大表時用它 mysql> truncate student; Query OK, 0 rows affected (0.03 sec) mysql> insert into student(name) values('xiaobai'); Query OK, 1 row affected (0.00 sec) mysql> select * from student; +----+---------+------+ | id | name | sex | +----+---------+------+ | 1 | xiaobai | male | +----+---------+------+ 1 row in set (0.00 sec)
瞭解：
查看可用的 開頭auto_inc的詞 mysql> show variables like 'auto_inc%'; +--------------------------+-------+ | Variable_name | Value | +--------------------------+-------+ | auto_increment_increment | 1 | | auto_increment_offset | 1 | +--------------------------+-------+ 2 rows in set (0.02 sec) # 步長auto_increment_increment,默認爲1 # 起始的偏移量auto_increment_offset, 默認是1 # 設置步長 爲會話設置，只在本次鏈接中有效 set session auto_increment_increment=5; #全局設置步長 都有效。 set global auto_increment_increment=5; # 設置起始偏移量 set global auto_increment_offset=3; #強調：If the value of auto_increment_offset is greater than that of auto_increment_increment, the value of auto_increment_offset is ignored. 翻譯：若是auto_increment_offset的值大於auto_increment_increment的值，則auto_increment_offset的值會被忽略 # 設置完起始偏移量和步長以後，再次執行show variables like'auto_inc%'; 發現跟以前同樣，必須先exit,再登陸纔有效。 mysql> show variables like'auto_inc%'; +--------------------------+-------+ | Variable_name | Value | +--------------------------+-------+ | auto_increment_increment | 5 | | auto_increment_offset | 3 | +--------------------------+-------+ 2 rows in set (0.00 sec) #由於以前有一條記錄id=1 mysql> select * from student; +----+---------+------+ | id | name | sex | +----+---------+------+ | 1 | xiaobai | male | +----+---------+------+ 1 row in set (0.00 sec) # 下次插入的時候，從起始位置3開始，每次插入記錄id+5 mysql> insert into student(name) values('ma1'),('ma2'),('ma3'); Query OK, 3 rows affected (0.00 sec) Records: 3 Duplicates: 0 Warnings: 0 mysql> select * from student; +----+---------+------+ | id | name | sex | +----+---------+------+ | 1 | xiaobai | male | | 3 | ma1 | male | | 8 | ma2 | male | | 13 | ma3 | male | +----+---------+------+
清空表區分delete和truncate的區別：
delete from t1；#若是有自增id，新增的數據，仍然是以刪除前的最後同樣做爲起始。
truncate table t1；數據量大，刪除速度比上一條快，且直接從零開始。
6.foreign key
一 快速理解foreign key
以前在建立表的時候都是在一張表中添加記錄，好比以下表：
公司有三個部門，可是有一個億的員工，那意味着這個字段須要重複存儲，部門名字越長，越浪費。
這個時候，
解決方法：
咱們徹底能夠定義一個部門表
而後讓員工信息表關聯該表，如何關聯，即foreign key
咱們能夠將上表改爲以下結構
此時有兩張表，一張是employee表（關聯表，也就是從表）。一張是department表，簡稱dep表（被慣量表，也叫主表）。
建立兩張表操做：
#1.建立表時先建立被關聯表，再建立關聯表 # 先建立被關聯表（dep表） create table dep( id int primary key, name varchar(20) not null, descripe varchar(20) not null ); #再建立關聯表（emp表） create table emp( id int primary key, name varchar(20) not null, age int not null, dep_id int, constraint fk_dep foreign key(dep_id) references dep(id) ); #2.插入記錄時，先往被關聯表中插入記錄，再往關聯表中插入記錄 insert into dep values (1,'IT','IT技術有限部門'), (2,'銷售部','銷售部門'), (3,'財務部','花錢太多部門'); insert into emp values (1,'zhangsan',18,1), (2,'lisi',19,1), (3,'egon',20,2), (4,'yuanhao',40,3), (5,'alex',18,2); 3.刪除表 #按道理來講，刪除了部門表中的某個部門，員工表的有關聯的記錄相繼刪除。 mysql> delete from dep where id=3; ERROR 1451 (23000): Cannot delete or update a parent row: a foreign key constraint fails (`db5`.`emp`, CONSTRAINT `fk_name` FOREIGN KEY (`dep_id`) REFERENCES `dep` (`id`)) #可是先刪除員工表的記錄以後，再刪除當前部門就沒有任何問題 mysql> delete from emp where dep =3; Query OK, 1 row affected (0.00 sec) mysql> select * from emp; +----+----------+-----+--------+ | id | name | age | dep_id | +----+----------+-----+--------+ | 1 | zhangsan | 18 | 1 | | 2 | lisi | 18 | 1 | | 3 | egon | 20 | 2 | | 5 | alex | 18 | 2 | +----+----------+-----+--------+ 4 rows in set (0.00 sec) mysql> delete from dep where id=3; Query OK, 1 row affected (0.00 sec) mysql> select * from dep; +----+-----------+----------------------+ | id | name | descripe | +----+-----------+----------------------+ | 1 | IT | IT技術有限部門 | | 2 | 銷售部 | 銷售部門 | +----+-----------+----------------------+ 2 rows in set (0.00 sec)
上面的刪除表記錄的操做比較繁瑣，按道理講，裁掉一個部門，該部門的員工也會被裁掉，其實呢，在建表的時候還有個很重要的內容，叫同步刪除，同步更新
接下來將剛建好的的兩張表所有刪除，先刪除關聯表（emp），在刪除被關聯表（dep）
接下來：
重複上面的操做建表
注意：在關連表中加入
on delete cascade #同步刪除
on update cascade #同步更新
修改emp表：
create table emp( id int primary key, name varchar(20) not null, age int not null, dep_id int, constraint fk_dep foreign key(dep_id) references dep(id) on delete cascade #同步刪除 on update cascade #同步更新 );
接下來的操做，就符合咱們正常的生活中的狀況了。
#再去刪被關聯表(dep)的記錄，關聯表(emp)中的記錄也跟着刪除 mysql> delete from dep where id=3; Query OK, 1 row affected (0.00 sec) mysql> select * from dep; +----+-----------+----------------------+ | id | name | descripe | +----+-----------+----------------------+ | 1 | IT | IT技術有限部門 | | 2 | 銷售部 | 銷售部門 | +----+-----------+----------------------+ 2 rows in set (0.00 sec) mysql> select * from emp; +----+----------+-----+--------+ | id | name | age | dep_id | +----+----------+-----+--------+ | 1 | zhangsan | 18 | 1 | | 2 | lisi | 19 | 1 | | 3 | egon | 20 | 2 | | 5 | alex | 18 | 2 | +----+----------+-----+--------+ 4 rows in set (0.00 sec) #再去更改被關聯表(dep)的記錄，關聯表(emp)中的記錄也跟着更改 mysql> update dep set id=222 where id=2; Query OK, 1 row affected (0.02 sec) Rows matched: 1 Changed: 1 Warnings: 0 # 趕忙去查看一下兩張表是否都被刪除了，是否都被更改了 mysql> select * from dep; +-----+-----------+----------------------+ | id | name | descripe | +-----+-----------+----------------------+ | 1 | IT | IT技術有限部門 | | 222 | 銷售部 | 銷售部門 | +-----+-----------+----------------------+ 2 rows in set (0.00 sec) mysql> select * from emp; +----+----------+-----+--------+ | id | name | age | dep_id | +----+----------+-----+--------+ | 1 | zhangsan | 18 | 1 | | 2 | lisi | 19 | 1 | | 3 | egon | 20 | 222 | | 5 | alex | 18 | 222 | +----+----------+-----+--------+ 4 rows in set (0.00 sec)