java Thread 類的源碼閱讀(oracle jdk1.8)

java線程類的源碼分析閱讀技巧;java

首先閱讀thread類重點關注一下幾個問題;app

一、start() ,啓動一個線程是如何實現的?less

二、java線程狀態機的變化過程以及如何實現的?ide

三、源碼分析


 

一、start方法的源碼以下:ui

new Thread(Runnable);代碼內部實際代碼以下:this

    /**
     * Initializes a Thread.
     *
     * @param g the Thread group
     * @param target the object whose run() method gets called
     * @param name the name of the new Thread
     * @param stackSize the desired stack size for the new thread, or
     *        zero to indicate that this parameter is to be ignored.
     * @param acc the AccessControlContext to inherit, or
     *            AccessController.getContext() if null
     * @param inheritThreadLocals if {@code true}, inherit initial values for
     *            inheritable thread-locals from the constructing thread
     */
    private void init(ThreadGroup g, Runnable target, String name,
                      long stackSize, AccessControlContext acc,
                      boolean inheritThreadLocals) {
        if (name == null) {
            throw new NullPointerException("name cannot be null");
        }

        this.name = name;

        Thread parent = currentThread();
        SecurityManager security = System.getSecurityManager();
        if (g == null) {
            /* Determine if it's an applet or not */

            /* If there is a security manager, ask the security manager
               what to do. */
            if (security != null) {
                g = security.getThreadGroup();
            }

            /* If the security doesn't have a strong opinion of the matter
               use the parent thread group. */
            if (g == null) {
                g = parent.getThreadGroup();
            }
        }

        /* checkAccess regardless of whether or not threadgroup is
           explicitly passed in. */
        g.checkAccess();

        /*
         * Do we have the required permissions?
         */
        if (security != null) {
            if (isCCLOverridden(getClass())) {
                security.checkPermission(SUBCLASS_IMPLEMENTATION_PERMISSION);
            }
        }

        g.addUnstarted();

        this.group = g;
        this.daemon = parent.isDaemon();
        this.priority = parent.getPriority();
        if (security == null || isCCLOverridden(parent.getClass()))
            this.contextClassLoader = parent.getContextClassLoader();
        else
            this.contextClassLoader = parent.contextClassLoader;
        this.inheritedAccessControlContext =
                acc != null ? acc : AccessController.getContext();
        this.target = target;
        setPriority(priority);
        if (inheritThreadLocals && parent.inheritableThreadLocals != null)
            this.inheritableThreadLocals =
                ThreadLocal.createInheritedMap(parent.inheritableThreadLocals);
        /* Stash the specified stack size in case the VM cares */
        this.stackSize = stackSize;

        /* Set thread ID */
        tid = nextThreadID();
    }
View Code

而後看start方法代碼以下:spa

 /**
     * Causes this thread to begin execution; the Java Virtual Machine
     * calls the <code>run</code> method of this thread.
     * <p>
     * The result is that two threads are running concurrently: the
     * current thread (which returns from the call to the
     * <code>start</code> method) and the other thread (which executes its
     * <code>run</code> method).
     * <p>
     * It is never legal to start a thread more than once.
     * In particular, a thread may not be restarted once it has completed
     * execution.
     *
     * @exception  IllegalThreadStateException  if the thread was already
     *               started.
     * @see        #run()
     * @see        #stop()
     */
    public synchronized void start() {
        /**
         * This method is not invoked for the main method thread or "system"
         * group threads created/set up by the VM. Any new functionality added
         * to this method in the future may have to also be added to the VM.
         *
         * A zero status value corresponds to state "NEW".
         */
        if (threadStatus != 0)
            throw new IllegalThreadStateException();

        /* Notify the group that this thread is about to be started
         * so that it can be added to the group's list of threads
         * and the group's unstarted count can be decremented. */
        group.add(this);

        boolean started = false;
        try {
            start0();
            started = true;
        } finally {
            try {
                if (!started) {
                    group.threadStartFailed(this);
                }
            } catch (Throwable ignore) {
                /* do nothing. If start0 threw a Throwable then
                  it will be passed up the call stack */
            }
        }
    }

    private native void start0();

因而可知start方法的本質是調用本地方法start0()即進行的系統調用;線程

 

二、java線程的狀態機的變化狀況:重點關注 Thread中的一個靜態枚舉內部類,State  和Thread中的一個變量 threadStatus 的變化rest

threadStatus代碼以下:

  /* Java thread status for tools,
     * initialized to indicate thread 'not yet started'
     */

    private volatile int threadStatus = 0;

可是奇怪的是發如今Thread類中並無對threadStatus進行過賦值。故猜想緣由是在native方法中對threadStatus進行賦值。由於該變量由volatile修飾,所以在native方法進行變量修改的同時Thread類中就能同時獲取到該變量的最新值。

 
一下是完整的狀態變化過程與狀態代碼
 /**
     * A thread state.  A thread can be in one of the following states:
     * <ul>
     * <li>{@link #NEW}<br>
     *     A thread that has not yet started is in this state.
     *     </li>
     * <li>{@link #RUNNABLE}<br>
     *     A thread executing in the Java virtual machine is in this state.
     *     </li>
     * <li>{@link #BLOCKED}<br>
     *     A thread that is blocked waiting for a monitor lock
     *     is in this state.
     *     </li>
     * <li>{@link #WAITING}<br>
     *     A thread that is waiting indefinitely for another thread to
     *     perform a particular action is in this state.
     *     </li>
     * <li>{@link #TIMED_WAITING}<br>
     *     A thread that is waiting for another thread to perform an action
     *     for up to a specified waiting time is in this state.
     *     </li>
     * <li>{@link #TERMINATED}<br>
     *     A thread that has exited is in this state.
     *     </li>
     * </ul>
     *
     * <p>
     * A thread can be in only one state at a given point in time.
     * These states are virtual machine states which do not reflect
     * any operating system thread states.
     *
     * @since   1.5
     * @see #getState
     */
    public enum State {
        /**
         * Thread state for a thread which has not yet started.
         */
        NEW,

        /**
         * Thread state for a runnable thread.  A thread in the runnable
         * state is executing in the Java virtual machine but it may
         * be waiting for other resources from the operating system
         * such as processor.
         */
        RUNNABLE,

        /**
         * Thread state for a thread blocked waiting for a monitor lock.
         * A thread in the blocked state is waiting for a monitor lock
         * to enter a synchronized block/method or
         * reenter a synchronized block/method after calling
         * {@link Object#wait() Object.wait}.
         */
        BLOCKED,

        /**
         * Thread state for a waiting thread.
         * A thread is in the waiting state due to calling one of the
         * following methods:
         * <ul>
         *   <li>{@link Object#wait() Object.wait} with no timeout</li>
         *   <li>{@link #join() Thread.join} with no timeout</li>
         *   <li>{@link LockSupport#park() LockSupport.park}</li>
         * </ul>
         *
         * <p>A thread in the waiting state is waiting for another thread to
         * perform a particular action.
         *
         * For example, a thread that has called <tt>Object.wait()</tt>
         * on an object is waiting for another thread to call
         * <tt>Object.notify()</tt> or <tt>Object.notifyAll()</tt> on
         * that object. A thread that has called <tt>Thread.join()</tt>
         * is waiting for a specified thread to terminate.
         */
        WAITING,

        /**
         * Thread state for a waiting thread with a specified waiting time.
         * A thread is in the timed waiting state due to calling one of
         * the following methods with a specified positive waiting time:
         * <ul>
         *   <li>{@link #sleep Thread.sleep}</li>
         *   <li>{@link Object#wait(long) Object.wait} with timeout</li>
         *   <li>{@link #join(long) Thread.join} with timeout</li>
         *   <li>{@link LockSupport#parkNanos LockSupport.parkNanos}</li>
         *   <li>{@link LockSupport#parkUntil LockSupport.parkUntil}</li>
         * </ul>
         */
        TIMED_WAITING,

        /**
         * Thread state for a terminated thread.
         * The thread has completed execution.
         */
        TERMINATED;
    }

    /**
     * Returns the state of this thread.
     * This method is designed for use in monitoring of the system state,
     * not for synchronization control.
     *
     * @return this thread's state.
     * @since 1.5
     */
    public State getState() {
        // get current thread state
        return sun.misc.VM.toThreadState(threadStatus);
    }
View Code
相關文章
相關標籤/搜索