國行ME860刷MIUI3.9.27

刷機前：

 

系統版本:45.2.3.ME860.ChinaRetail.en.CN

 

Android版本:2.3.4

 

基帶版本:BP_N_01.38.00R

 

WEBtop版本:WT_1.2.0-144_8

 

內核版本:2.6.32.9-00007-g9570040 w21816@zkr30lnxdroid07 #3

 

內部版本號: 4.5.3-118_OLY-3

刷機後：

系統版本:45.2.3.ME860.ChinaRetail.en.CN

Android版本:4.1.2 JZO54K

MIUI版本：MIUI-3.9.27

基帶版本:N_01.92.00R

內核版本:2.6.32.60-MB860-CM10-ged7b511

 

 

刷機前準備：
1.電量保持在60%以上；

2.下載法底工具包sbf：RSD, MOTO驅動，法底

3. 下載解鎖包 sbf：unlock.sbf，fastboot.

4. 下載第三方Recovery img：recovery-blue-atrix5.img， moto-fastboot.exe

5. 下載手動卡刷包ROM http://www.miui.com/getrom.php?r=48

完美教程：http://bbs.gfan.com/android-3955742-1-1.html

 該教程出自解鎖技術尚不完善之時，如今已經無需這麼麻煩了-unlock.sbf能夠工做的很好， 但仍不失爲一篇好指導。

RSD刷入法底包sbf：

1.手機關機，同時按音量上鍵+開機鍵進入RSD模式，再用USB線鏈接手機和電腦。


2.運行已安裝好的RSD Lite刷機工具。

3.在RSD Lite界面，Filename欄選擇工具包內的sbf文件，完成後點擊start開始刷入：


當RSD刷機工具提示「Please manually power up this phone」的時候表示已經刷底包完成；或者手機會自動重啓，工具提示完成PASS。

若是手機提示failed to boot，說明刷入底包出現異常，請認真肯定本身的前置條件是否符合，並關機，正確按鍵（不必定會顯示相關模式，按鍵正確便可），鏈接數據線，再進行刷機；最好更換官方底包。

RSD刷入解鎖包sbf：

手機關機，而後按住音量下鍵不放再按開機鍵，等段時間進入MOTO調試模式。看到fastboot字後，鬆開電源鍵和音量鍵，按音量下鍵持續選擇到RSD文字後，按音量上鍵肯定，進入，RSD模式。
再者電腦打開RSD刷機工具，選擇UNLOCK.SBF解鎖文件，這裏和刷入法底的方法是如出一轍，只是你刷的是解鎖文件，這裏仍是等到100%，開機後。耐心等待哦，別看文件小，仍是等好久才刷好
下面手機再次關機！重複按音量下鍵不放按開機鍵，直至出現fastboot字樣，鬆手，接着按音量上鍵，看到屏幕上方變成第二行出現Starting Fastboot protocol support字樣！
數據線和電腦是正常鏈接好，而後進入c盤，雙擊Command Prompt，

輸入fastboot oem unlock回車，出現16位數字和字母組成的碼！繼續輸入fastboot oem unlock 和出現的16位碼 回車，顯示已經解鎖Bootloader成功！
而後再輸入fastboot reboot回車，手機重啓！整個解鎖步驟完成！手機開機，開機第一屏左上角會多了一個unlock字樣！說明你的機器已是解鎖!

RSD刷入recovery img:

關手機，而後同時按電源健和音量-健，直到手機屏幕出現Fastboot字樣，再按音量+健，

進入Fastboot刷機模式，將數據線鏈接手機和電腦;

－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－

電腦左下角——運行——輸入CMD 回車——輸入d: 回車——輸入cd xilige 回車——輸入如下內容

－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－

moto-fastboot.exe devices （回車）

moto-fastboot.exe erase recovery（回車）

moto-fastboot.exe flash recovery recovery-blue-atrix5.img（回車）

moto-fastboot.exe reboot（回車）

Recovery恢復第三方ROM

①將下載好的ROM包，基帶，WEBTOP等放入手機內存卡
②關機，開機按住音量下，看見fastboot之後再按幾回音量下，看到Android Recovery之後按音量上鍵，進入Recovery
③選擇 Wipe DATA/Factory reset 並確認 Yes -- delete all user data，
④選擇 Wipe CACHE partition 並確認 Yes - Wipe Cache，
⑤選擇advanced，再選wipe dalvik cache 並Yes，而後選go back返回上一級菜單
⑥選擇mounts and storage，再選format system【完成⑤後請執行此操做再開始刷入，避免卡第一屏】
⑦選擇install zip from sdcard，選擇choose zip from sdcard，找到你要刷的基帶，系統ROM，WEBTOP依次刷入
⑧刷完後選擇reboot system now重啓，刷完系統其實不用WIPE也同樣的，重要的是刷系統前必定要WIPE。

谷歌服務包

官方原版系統是沒有谷歌服務包的，要用谷歌服務的下載此包直接Recovery刷入便可。

 gapp
http://pan.baidu.com/share/link?shareid=571621&uk=3892341749

關於ROOT:

手機鏈接電腦，狀態欄USB鏈接設爲僅充電，手機設置--〉應用程序--〉開發--〉USB調試 打上勾，解壓運行國行2.3.5一鍵ROOT工具.zip中的runme.bat便可

 

常見問題：
1.刷完機出現無限重啓的，刷下推薦的基帶便可

 推薦基帶Radio：
http://pan.baidu.com/share/link?shareid=502248&uk=3892341749

知識：

Android Partition, SPL etc.

Partitions:
Followings are a list of partitions on your android phone.
misc - misc partition - 
recovery - Recovery Partition - This is where the original Recovery would go. Basically if you reboot into recovery it'll boot from here.
boot - This is your boot partition
system - This is where all your system information (ROM resides)
cache - cache (When you factory reset the phone, this area is wiped)
userdata - user data (like your login, your user settings etc) When you factory reset the phone, this area is wiped)

So, if you replace the recovery image, you are pretty much set for updates provided here at XDA. Note: By replacing your recovery image, you may not be able to have OTA updates. 

ROM images will normally replace boot and system images at the same time and often time, userdata and cache too; reseting the phone completely. 


SPL/Bootloader/Radio/Bricking Phones:
SPL / Bootloader is like BIOS on a computer. At least I think of it that way. SPL can be updated! SPL comes as either Security-On of Security-Off (S-ON/S-OFF). 

Note: It is my understanding that radio will boot first, followed by other systems. So it is IMPORTANT that your radio image/version will work with your SPL image/version. This is the one and only reason for phones being bricked. You can not brick your phone by flashing a ROM or Boot image or recovery image. Once you flash the wrong radio for the SPL, the only known method of recovery is to send the phone back into HTC for repair.

 

adb - Android Debug Bridge - One of the two things you'll need to know if you ever want to do anything non-conventional on your android based phone. 
List of commands that can be used by adb can be prompted by typing adb at the system shell (command prompt or terminal)

Notable adb commands:

adb devices - If you don't know anything, this is the ONE thing you have to know. 
adb devices will give you a list of devices connected to the computer. This is also a good way to make sure that your phone is actually connected to the computer. 

adb reboot (bootloader|recovery)
adb reboot - this will reboot your phone normally.
adb reboot bootloader - this will reboot your phone back into the bootloader (white screen with the android on wheels)
adb reboot recovery - this will reboot your phone back into recovery console (either default or amon_ra's recovery).
adb shell - this will shell into the phone and you can now explore the phone. Remember phone's native backend os is linux so know your linux commands.
adb remount - remounts the system partition on the phone so you can you read/write to it.
adb push xxx yyy - will push xxx file from computer into yyy location/file on phone (needs rooted access)
adb pull xxx yyy - will pull xxx file from phone into yyy location/file on computer (needs rooted access)


Fastboot is protocol used to update the flash filesystem in Android devices from a host over USB. It allows flashing of unsigned partition images.

Notable fastboot commands:

fastboot devices - If you don't know anything, this is the ONE thing you have to know. 
fastboot devices will give you a list of devices connected to the computer. This is also a good way to make sure that your phone is actually connected to the computer. 

fastboot reboot - this will reboot your phone normally
fastboot oem unlock - this will unlock your bootloader - NOTE THIS WILL VOID YOUR NEXUS ONE WARRANTY
fastboot erase XXX - Will erase the partition XXX (such as userdata, cache) - mainly used for resetting phone and clearing userdata / factory settings.
fastboot flash XXX YYY - This will flash XXX partitionn with YYY image. 
e.g: fastboot flash system system_update.img will flash/update your system partition with an image called system_update

 

爲何要刷底包呢?這個要從MOTO鎖掉BL提及。BL是個相似於BIOS的東西，介於主機硬件和系統之間的硬件可以識別的基本輸入輸出系統。裝系 統必需要有這個，就像給電腦裝系統必須有BIOS同樣，試想一下沒有BIOS你怎麼裝系統？？而MOTO鎖掉BL是經過密鑰識別技術來實現的，也就是說被 MOTO鎖了BL的機器必須刷帶有密鑰的包纔可以被系統所識別，這也就是爲何想DEFY這樣被鎖了的機器只能刷官方底包的緣由。