LimeSDR環境安裝與測試

虛擬機：ubuntu虛擬機建議4g內存，64g硬盤，usb3.0已開啓 　　　　//不然編譯過程耗盡內存

1 換阿里雲源（加速）
# deb cdrom:[Ubuntu 16.04 LTS _Xenial Xerus_ - Release amd64 (20160420.1)]/ xenial main restricted
deb-src http://archive.ubuntu.com/ubuntu xenial main restricted #Added by software-properties
deb http://mirrors.aliyun.com/ubuntu/ xenial main restricted
deb-src http://mirrors.aliyun.com/ubuntu/ xenial main restricted multiverse universe #Added by software-properties
deb http://mirrors.aliyun.com/ubuntu/ xenial-updates main restricted
deb-src http://mirrors.aliyun.com/ubuntu/ xenial-updates main restricted multiverse universe #Added by software-properties
deb http://mirrors.aliyun.com/ubuntu/ xenial universe
deb http://mirrors.aliyun.com/ubuntu/ xenial-updates universe
deb http://mirrors.aliyun.com/ubuntu/ xenial multiverse
deb http://mirrors.aliyun.com/ubuntu/ xenial-updates multiverse
deb http://mirrors.aliyun.com/ubuntu/ xenial-backports main restricted universe multiverse
deb-src http://mirrors.aliyun.com/ubuntu/ xenial-backports main restricted universe multiverse #Added by software-properties
deb http://archive.canonical.com/ubuntu xenial partner
deb-src http://archive.canonical.com/ubuntu xenial partner
deb http://mirrors.aliyun.com/ubuntu/ xenial-security main restricted
deb-src http://mirrors.aliyun.com/ubuntu/ xenial-security main restricted multiverse universe #Added by software-properties
deb http://mirrors.aliyun.com/ubuntu/ xenial-security universe
deb http://mirrors.aliyun.com/ubuntu/ xenial-security multiverse

2 官方命令--limesuite和soapysdr安裝
sudo add-apt-repository -y ppa:myriadrf/drivers
sudo apt-get update
sudo apt-get install limesuite liblimesuite-dev limesuite-udev limesuite-images
sudo apt-get install soapysdr soapysdr-module-lms7

3 探測命令
#make sure that STREAM is one of the available connections
LimeUtil --info
#now run LimeUtil with --find to locate devices on the system
LimeUtil --find

或者

#Example print output from LimeUtil
* [module=STREAM, media=USB, name=USB 3.0 (LimeSDR-USB), addr=241:1204]
Similarly, when working with SDR ecosystem applications, its also good to verify that the LimeSDR can be found by SoapySDRUtil:

#make sure that lime is one of the available factories
SoapySDRUtil --info

#now run SoapySDRUtil with --find to locate devices on the system
SoapySDRUtil --find 　　　　　　　　　　　　　　　　　　 //發現lime
SoapySDRUtil --probe=lime　　　　　　　　　　　　　　    //鏈接lime

4 pybombs切換清華源（安裝gnuradio會快不少）
apt-get install git python-pip cmake
pip install pybombs
pybombs recipes remove gr-recipes
pybombs recipes remove gr-etcetera
pybombs recipes add gr-recipes git+https://mirrors.tuna.tsinghua.edu.cn/pybombs/recipes/gr-recipes.git
pybombs recipes add gr-etcetera git+https://mirrors.tuna.tsinghua.edu.cn/pybombs/recipes/gr-etcetera.git
make /root/gnuradio-prefix
cd /root/gnuradio-prefix
pybombs prefix init

5 安裝，設置環境變量，並啓動gnuradio
pybombs install gnuradio
source /root/gnuradio-prefix/setup_env.sh
gnuradio-companion
開機自動設置環境變量,把source命令寫入/etc/profile文件，這樣每次開機都會自動設置環境變量。
$ echo 'source /root/gnuradio-prefix/setup_env.sh'>>/etc/profile

6 源碼安裝gr-osmosdr 　　　　　　　　　　　　　　　　 //不建議pybombs安裝
首先 安裝gr-osmosdr 的支持包
sudo apt-get install libsoapysdr-dev
sudo apt install gr-fcdproplus
接下來clone源碼
git clone git://git.osmocom.org/gr-osmosdr
cd gr-osmosdr/
mkdir build
cd build/
cmake ../
make
sudo make install
sudo ldconfig

7 測試limesdr執行gnuradio網上找的grc示例wget http://www.0xroot.cn/SDR/signal-record.grcgnuradio-companion signal-record.grc