Qt之msvc-version.conf loaded but QMAKE_MSC_VER isn't set
最近用Qt5.10.0 VS2015新建一個工程，構建時報如下錯誤： msvc-version.conf loaded but QMAKE_MSC_VER isn't set 解決方法： 打開文件D:\Qt\Qt5.10.0\5.10.0\msvc2015\mkspecs\common\msvc-version.conf 在其中添加版本QMAKE_MSC_VER = 1900，如下圖所示。
相關文章
- 1. msvc-version.conf loaded but QMAKE_MSC_VER isn't set
- 2. QT遇到error: msvc-version.conf loaded but QMAKE_MSC_VER isn't set
- 3. Qt 創建項目或打開項目出現：Project ERROR: msvc-version.conf loaded but QMAKE_MSC_VER isn't set 解決辦法
- 4. loaded some nib but the view outlet was not set
- 5. Qt開發問題
- 6. loaded the "ViewController" nib but the view outlet was not set. 處理方式
- 7. Module load completed but symbols could not be loaded
- 8. Error: Requires Babel "^7.0.0-0", but was loaded with "6.26.3".
- 9. QT QSqlDatabase: QMYSQL driver not loaded
- 10. ERR Client sent AUTH, but no password is set
- 更多相關文章...
- • Scala Set(集合) - Scala教程
- • XSLT
- • 互聯網組織的未來：剖析GitHub員工的任性之源
- • Github 簡明教程
相關標籤/搜索
每日一句
-
每一个你不满意的现在，都有一个你没有努力的曾经。
歡迎關注本站公眾號,獲取更多信息
相關文章
- 1. msvc-version.conf loaded but QMAKE_MSC_VER isn't set
- 2. QT遇到error: msvc-version.conf loaded but QMAKE_MSC_VER isn't set
- 3. Qt 創建項目或打開項目出現：Project ERROR: msvc-version.conf loaded but QMAKE_MSC_VER isn't set 解決辦法
- 4. loaded some nib but the view outlet was not set
- 5. Qt開發問題
- 6. loaded the "ViewController" nib but the view outlet was not set. 處理方式
- 7. Module load completed but symbols could not be loaded
- 8. Error: Requires Babel "^7.0.0-0", but was loaded with "6.26.3".
- 9. QT QSqlDatabase: QMYSQL driver not loaded
- 10. ERR Client sent AUTH, but no password is set