cas4.0.1返回給客戶端登陸用戶的更多信息
首先我用的是 cas server 4.0.1版本的 網上不少都是 3.x的 我就不做考慮了
由於版本間配置差別太大
網上有關4.x的 配置資料太少 因此我在這裏把這個博客寫下 但願對 跟我遇到相同問題的人有所幫助 同時也是對互聯網的一種感恩回饋 由於我也是看了不少博客和資料後 才解決這個問題的
個人項目需求有點特殊 能夠用郵箱和手機號碼登陸
而登陸用的username又不是用的這兩個字段 是經過一個值爲uuid的 username字段實現的 （老項目重構 無法改表結構 ）
因此 光經過默認返回的 登陸帳號是不夠的 由於 用戶登陸後是能夠修改郵箱和手機的 一旦修改後 個人 客戶端獲取就 會有問題
參考了 網上的
http://www.cnblogs.com/vhua/p/cas_4.html
http://www.tuicool.com/articles/QB3iia
這兩個博客
第一個博客的方法沒有 給出如何 用數據庫的方式實現 以前在如何用jdbctemplate查詢的時候一直 搞了好久沒搞出來 參考了第二個博客後搞出來了
先把 deployerConfigContext.xml 貼出來
核心的 AccoutAttributeDao
protocol 2.0文件下 的 casServiceValidationSuccess.jsp頁面加上
客戶端調用
最後貼上客戶端登陸後 得到的用戶值的效果圖
功夫不負有心人 終於解決這個問題了！ 若是看了個人博客 仍是沒解決 能夠 加扣扣羣 186408628 來 羣裏 @ 我 我就是羣主
由於版本間配置差別太大
網上有關4.x的 配置資料太少 因此我在這裏把這個博客寫下 但願對 跟我遇到相同問題的人有所幫助 同時也是對互聯網的一種感恩回饋 由於我也是看了不少博客和資料後 才解決這個問題的
個人項目需求有點特殊 能夠用郵箱和手機號碼登陸
而登陸用的username又不是用的這兩個字段 是經過一個值爲uuid的 username字段實現的 （老項目重構 無法改表結構 ）
因此 光經過默認返回的 登陸帳號是不夠的 由於 用戶登陸後是能夠修改郵箱和手機的 一旦修改後 個人 客戶端獲取就 會有問題
參考了 網上的
http://www.cnblogs.com/vhua/p/cas_4.html
http://www.tuicool.com/articles/QB3iia
這兩個博客
第一個博客的方法沒有 給出如何 用數據庫的方式實現 以前在如何用jdbctemplate查詢的時候一直 搞了好久沒搞出來 參考了第二個博客後搞出來了
先把 deployerConfigContext.xml 貼出來
<?xml version="1.0" encoding="UTF-8"?>
<!-- Licensed to Jasig under one or more contributor license agreements.
See the NOTICE file distributed with this work for additional information
regarding copyright ownership. Jasig licenses this file to you under the
Apache License, Version 2.0 (the "License"); you may not use this file except
in compliance with the License. You may obtain a copy of the License at the
following location: http://www.apache.org/licenses/LICENSE-2.0 Unless required
by applicable law or agreed to in writing, software distributed under the
License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS
OF ANY KIND, either express or implied. See the License for the specific
language governing permissions and limitations under the License. -->
<!-- | deployerConfigContext.xml centralizes into one file some of the declarative
configuration that | all CAS deployers will need to modify. | | This file
declares some of the Spring-managed JavaBeans that make up a CAS deployment.
| The beans declared in this file are instantiated at context initialization
time by the Spring | ContextLoaderListener declared in web.xml. It finds
this file because this | file is among those declared in the context parameter
"contextConfigLocation". | | By far the most common change you will need
to make in this file is to change the last bean | declaration to replace
the default authentication handler with | one implementing your approach
for authenticating usernames and passwords. + -->
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:p="http://www.springframework.org/schema/p"
xmlns:c="http://www.springframework.org/schema/c" xmlns:context="http://www.springframework.org/schema/context"
xmlns:tx="http://www.springframework.org/schema/tx" xmlns:util="http://www.springframework.org/schema/util"
xmlns:sec="http://www.springframework.org/schema/security"
xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-3.2.xsd
http://www.springframework.org/schema/tx http://www.springframework.org/schema/tx/spring-tx-3.2.xsd
http://www.springframework.org/schema/security http://www.springframework.org/schema/security/spring-security-3.2.xsd
http://www.springframework.org/schema/util http://www.springframework.org/schema/util/spring-util.xsd
http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context.xsd">
<import resource="spring-configuration/propertyFileConfigurer.xml" />
<!-- | The authentication manager defines security policy for authentication
by specifying at a minimum | the authentication handlers that will be used
to authenticate credential. While the AuthenticationManager | interface supports
plugging in another implementation, the default PolicyBasedAuthenticationManager
should | be sufficient in most cases. + -->
<bean id="authenticationManager"
class="org.jasig.cas.authentication.PolicyBasedAuthenticationManager">
<constructor-arg>
<map>
<!-- | IMPORTANT | Every handler requires a unique name. | If more than
one instance of the same handler class is configured, you must explicitly
| set its name to something other than its default name (typically the simple
class name). -->
<entry key-ref="proxyAuthenticationHandler" value-ref="proxyPrincipalResolver" />
<entry key-ref="primaryAuthenticationHandler" value-ref="primaryPrincipalResolver" />
</map>
</constructor-arg>
<!-- Uncomment the metadata populator to allow clearpass to capture and
cache the password This switch effectively will turn on clearpass. <property
name="authenticationMetaDataPopulators"> <util:list> <bean class="org.jasig.cas.extension.clearpass.CacheCredentialsMetaDataPopulator"
c:credentialCache-ref="encryptedMap" /> </util:list> </property> -->
<!-- | Defines the security policy around authentication. Some alternative
policies that ship with CAS: | | * NotPreventedAuthenticationPolicy - all
credential must either pass or fail authentication | * AllAuthenticationPolicy
- all presented credential must be authenticated successfully | * RequiredHandlerAuthenticationPolicy
- specifies a handler that must authenticate its credential to pass -->
<property name="authenticationPolicy">
<bean class="org.jasig.cas.authentication.AnyAuthenticationPolicy" />
</property>
<property name="authenticationMetaDataPopulators">
<list>
<bean
class="org.jasig.cas.authentication.SuccessfulHandlerMetaDataPopulator" />
<bean
class="org.jasig.cas.authentication.principal.RememberMeAuthenticationMetaDataPopulator" />
</list>
</property>
</bean>
<!-- Required for proxy ticket mechanism. -->
<bean id="proxyAuthenticationHandler"
class="org.jasig.cas.authentication.handler.support.HttpBasedServiceCredentialsAuthenticationHandler"
p:httpClient-ref="httpClient" />
<!-- | TODO: Replace this component with one suitable for your enviroment.
| | This component provides authentication for the kind of credential used
in your environment. In most cases | credential is a username/password pair
that lives in a system of record like an LDAP directory. | The most common
authentication handler beans: | | * org.jasig.cas.authentication.LdapAuthenticationHandler
| * org.jasig.cas.adaptors.jdbc.QueryDatabaseAuthenticationHandler | * org.jasig.cas.adaptors.x509.authentication.handler.support.X509CredentialsAuthenticationHandler
| * org.jasig.cas.support.spnego.authentication.handler.support.JCIFSSpnegoAuthenticationHandler -->
<!-- <bean id="primaryAuthenticationHandler" class="org.jasig.cas.authentication.AcceptUsersAuthenticationHandler">
<property name="users"> <map> <entry key="casuser" value="Mellon"/> </map>
</property> </bean> -->
<!-- 自定義數據庫鑑權 -->
<!-- <bean id="primaryAuthenticationHandler" class="io.github.howiefh.cas.authentication.ValidUserQueryDBAuthenticationHandler">
<constructor-arg ref="dataSource" index="0"></constructor-arg> <constructor-arg
value="${auth.sql}" index="1"></constructor-arg> <constructor-arg value="MD5"
index="2"></constructor-arg> </bean> -->
<!-- 自定義數據庫鑑權 -->
<bean id="primaryAuthenticationHandler"
class="io.github.howiefh.cas.authentication.ValidUserQueryDBAuthenticationHandler">
<constructor-arg ref="druidDataSource" index="0"></constructor-arg>
<constructor-arg value="${auth.sql}" index="1"></constructor-arg>
<constructor-arg value="${auth.sql_email}" index="2"></constructor-arg>
<constructor-arg value="${auth.sql_phone}" index="3"></constructor-arg>
<constructor-arg value="SHA1" index="4"></constructor-arg>
</bean>
<!-- 加密 -->
<!-- <property name="passwordEncoder" ref="myPasswordEncoder" /> -->
<!-- 密碼不加密 -->
<bean id="myPasswordEncoder"
class="org.jasig.cas.authentication.handler.PlainTextPasswordEncoder" />
<!-- 密碼加密 -->
<!-- <bean id="myPasswordEncoder" class="org.jasig.cas.authentication.handler.MyPasswordEncoder">
</bean> -->
<!-- 數據源 -->
<bean id="dataSource" class="com.alibaba.druid.pool.DruidDataSource"
init-method="init" destroy-method="close">
<property name="driverClassName" value="${dataSource.driver}"></property>
<property name="url" value="${dataSource.url}" />
<property name="username" value="${dataSource.username}" />
<property name="password" value="${dataSource.password}" />
<property name="maxActive" value="${dataSource.maxActive}" />
<property name="initialSize" value="${dataSource.initialSize}" />
<property name="maxWait" value="${dataSource.maxWait}" />
<property name="minIdle" value="${dataSource.minIdle}" />
<property name="timeBetweenEvictionRunsMillis" value="${dataSource.timeBetweenEvictionRunsMillis}" />
<property name="minEvictableIdleTimeMillis" value="${dataSource.minEvictableIdleTimeMillis}" />
<property name="validationQuery" value="${dataSource.validationQuery}" />
<property name="testWhileIdle" value="${dataSource.testWhileIdle}" />
<property name="testOnBorrow" value="${dataSource.testOnBorrow}" />
<property name="testOnReturn" value="${dataSource.testOnReturn}" />
<property name="maxOpenPreparedStatements" value="${dataSource.maxOpenPreparedStatements}" />
<property name="removeAbandoned" value="${dataSource.removeAbandoned}" /> <!-- 打開removeAbandoned功能 -->
<property name="removeAbandonedTimeout" value="${dataSource.removeAbandonedTimeout}" /> <!-- 1800秒，也就是30分鐘 -->
<property name="logAbandoned" value="${dataSource.logAbandoned}" /> <!-- 關閉abanded鏈接時輸出錯誤日誌 -->
</bean>
<!-- <bean id="myjdbctemplate" class="org.springframework.jdbc.core.JdbcTemplate">
<property name="dataSource"> <ref local="druidDataSource" /> </property>
</bean> -->
<bean id="jdbcTemplate" class="org.springframework.jdbc.core.JdbcTemplate">
<property name="dataSource" ref="druidDataSource"/>
</bean>
<!-- 配置 Spring 使用的數據源 -->
<bean id="druidDataSource" class="com.alibaba.druid.pool.DruidDataSource"
init-method="init" destroy-method="close">
<property name="dbType" value="sqlserver" />
<!-- 基本屬性配置 -->
<property name="url" value="${datasource2.url}" />
<property name="username" value="${datasource2.username}" />
<property name="password" value="${datasource2.password}" />
<!-- 配置初始化大小、最小、最大 -->
<property name="initialSize" value="10" />
<property name="minIdle" value="5" />
<property name="maxActive" value="20" />
<!-- 配置獲取鏈接等待超時的時間 -->
<property name="maxWait" value="60000" />
<!-- 配置間隔多久才進行一次檢測，檢測須要關閉的空閒鏈接，單位是毫秒 -->
<property name="timeBetweenEvictionRunsMillis" value="60000" />
<!-- 配置一個鏈接在池中最小生存的時間，單位是毫秒 -->
<property name="minEvictableIdleTimeMillis" value="300000" />
<!-- <property name="validationQuery" value="SELECT 'x'" /> <property name="testWhileIdle"
value="true" /> <property name="testOnBorrow" value="false" /> <property
name="testOnReturn" value="false" /> -->
<!-- 打開PSCache，而且指定每一個鏈接上PSCache的大小 <property name="poolPreparedStatements"
value="false" /> <property name="maxPoolPreparedStatementPerConnectionSize"
value="20" /> -->
<!-- 配置監控統計攔截的filters -->
<property name="filters" value="stat,wall" />
<!-- 合併sql -->
<property name="proxyFilters">
<list>
<ref bean="stat-filter" />
</list>
</property>
</bean>
<bean id="stat-filter" class="com.alibaba.druid.filter.stat.StatFilter">
<property name="slowSqlMillis" value="10000" />
<property name="logSlowSql" value="true" />
</bean>
<!-- <bean id="dataSource_sqlserver" class="org.apache.commons.dbcp.BasicDataSource"
destroy-method="close"> <property name="driverClassName"> <value>com.microsoft.sqlserver.jdbc.SQLServerDriver</value>
</property> <property name="url"> <value>jdbc:sqlserver://localhost:1433;database=Z_MARK_MANAGE;integratedSecurity=false</value>
</property> <property name="username"> <value>sa</value> </property> <property
name="password"> <value>wellhope</value> </property> <property name="validationQuery">
<value>select count(*) from [Z_MARK_MANAGE].[dbo].[USER_INFO]</value> </property>
</bean> -->
<!-- Required for proxy ticket mechanism -->
<bean id="proxyPrincipalResolver"
class="org.jasig.cas.authentication.principal.BasicPrincipalResolver" />
<!-- | Resolves a principal from a credential using an attribute repository
that is configured to resolve | against a deployer-specific store (e.g. LDAP). -->
<bean id="primaryPrincipalResolver"
class="org.jasig.cas.authentication.principal.PersonDirectoryPrincipalResolver">
<property name="attributeRepository" ref="attributeRepository" />
</bean>
<!-- Bean that defines the attributes that a service may return. This example
uses the Stub/Mock version. A real implementation may go against a database
or LDAP server. The id should remain "attributeRepository" though. + -->
<!--修改後-->
<bean id="attributeRepository" class="org.jasig.services.persondir.support.AccoutAttributeDao" >
<property name="jdbcTemplate" ref="jdbcTemplate"/>
</bean>
<!--修改後 end-->
<!-- 修改前 -->
<!-- <bean id="attributeRepository" class="org.jasig.services.persondir.support.StubPersonAttributeDao"
p:backingMap-ref="attrRepoBackingMap" /> <util:map id="attrRepoBackingMap">
<entry key="uid" value="uid" /> <entry key="eduPersonAffiliation" value="eduPersonAffiliation"
/> <entry key="groupMembership" value="groupMembership" /> </util:map>
-->
<!-- Sample, in-memory data store for the ServiceRegistry. A real implementation
would probably want to replace this with the JPA-backed ServiceRegistry DAO
The name of this bean should remain "serviceRegistryDao". + -->
<bean id="serviceRegistryDao" class="org.jasig.cas.services.InMemoryServiceRegistryDaoImpl"
p:registeredServices-ref="registeredServicesList" />
<util:list id="registeredServicesList">
<!-- 修改前 -->
<bean class="org.jasig.cas.services.RegexRegisteredService" p:id="0"
p:name="HTTP and IMAP" p:description="Allows HTTP(S) and IMAP(S) protocols"
p:serviceId="^(https?|imaps?)://.*" p:evaluationOrder="10000001" />
<!-- 修改後 -->
<!-- <bean class="org.jasig.cas.services.RegexRegisteredService" p:id="0"
p:name="HTTP and IMAP" p:description="Allows HTTP(S) and IMAP(S) protocols"
p:serviceId="^(https?|imaps?)://.*" p:evaluationOrder="10000001" >
<property name="allowedAttributes">
<list>
<value>id</value>
<value>username</value>
<value>email</value>
<value>phonenumber</value>
</list>
</property>
</bean> -->
<!-- <bean class="org.jasig.cas.services.RegexRegisteredService">
<property name="id" value="1" />
<property name="name" value="HTTP and IMAP on example.com" />
<property name="description" value="Allows HTTP(S) and IMAP(S) protocols on example.com" />
<property name="serviceId" value="^(https?|imaps?)://.*" />
<property name="evaluationOrder" value="0" />
<property name="allowedAttributes">
<list>
<value>id</value>
<value>username</value>
<value>email</value>
<value>phonenumber</value>
</list>
</property>
</bean>
-->
<!-- 支持代理 --><!-- p:enabled=」true」 p:allowedToProxy=」true」 p:ssoEnabled=」true」 -->
<!-- Use the following definition instead of the above to further restrict
access to services within your domain (including sub domains). Note that
example.com must be replaced with the domain you wish to permit. This example
also demonstrates the configuration of an attribute filter that only allows
for attributes whose length is 3. -->
<!-- <bean class="org.jasig.cas.services.RegexRegisteredService"> <property
name="id" value="1" /> <property name="name" value="HTTP and IMAP on example.com"
/> <property name="description" value="Allows HTTP(S) and IMAP(S) protocols
on example.com" /> <property name="serviceId" value="^(https?|imaps?)://([A-Za-z0-9_-]+\.)*example\.com/.*"
/> <property name="evaluationOrder" value="0" /> <property name="attributeFilter">
<bean class="org.jasig.cas.services.support.RegisteredServiceRegexAttributeFilter"
c:regex="^\w{3}$" /> </property> </bean> -->
</util:list>
<bean id="auditTrailManager"
class="com.github.inspektr.audit.support.Slf4jLoggingAuditTrailManager" />
<bean id="healthCheckMonitor" class="org.jasig.cas.monitor.HealthCheckMonitor"
p:monitors-ref="monitorsList" />
<util:list id="monitorsList">
<bean class="org.jasig.cas.monitor.MemoryMonitor"
p:freeMemoryWarnThreshold="10" />
<!-- NOTE The following ticket registries support SessionMonitor: * DefaultTicketRegistry
* JpaTicketRegistry Remove this monitor if you use an unsupported registry. -->
<bean class="org.jasig.cas.monitor.SessionMonitor"
p:ticketRegistry-ref="ticketRegistry"
p:serviceTicketCountWarnThreshold="5000" p:sessionCountWarnThreshold="100000" />
</util:list>
</beans>
核心的 AccoutAttributeDao
package org.jasig.services.persondir.support;
import java.util.Collections;
import java.util.HashMap;
import java.util.List;
import java.util.Map;
import org.jasig.services.persondir.IPersonAttributes;
import org.springframework.jdbc.core.JdbcTemplate;
public class AccoutAttributeDao extends StubPersonAttributeDao {
private JdbcTemplate jdbcTemplate;
public JdbcTemplate getJdbcTemplate() {
return jdbcTemplate;
}
public void setJdbcTemplate(JdbcTemplate jdbcTemplate) {
this.jdbcTemplate = jdbcTemplate;
}
@Override
public IPersonAttributes getPerson(String uid) {
String sql = "";
if (uid.indexOf("@") > 0) { // 若是是郵箱
sql = "select * from Account where email=?";
} else {
sql = "select * from Account where PhoneNumber=?";
}
//
final Map<String, Object> values = jdbcTemplate.queryForMap(sql, uid);
Map<String, List<Object>> attributes = new HashMap<String, List<Object>>();
attributes.put("username",
Collections.singletonList((Object) values.get("UserName")));
attributes.put("email",
Collections.singletonList((Object) values.get("Email")));
attributes.put("phonenumber",
Collections.singletonList((Object) values.get("PhoneNumber")));
attributes.put("id",
Collections.singletonList((Object) values.get("Id")));
return new AttributeNamedPersonImpl(attributes);
}
}
protocol 2.0文件下 的 casServiceValidationSuccess.jsp頁面加上
<c:if test="${fn:length(assertion.chainedAuthentications[fn:length(assertion.chainedAuthentications)-1].principal.attributes) > 0}">
<cas:attributes>
<c:forEach var="attr" items="${assertion.chainedAuthentications[fn:length(assertion.chainedAuthentications)-1].principal.attributes}">
<cas:${fn:escapeXml(attr.key)}>${fn:escapeXml(attr.value)}</cas:${fn:escapeXml(attr.key)}>
</c:forEach>
</cas:attributes>
</c:if>
客戶端調用
package com.gttown.app.user.controller;
import java.util.Map;
import javax.servlet.http.HttpServletRequest;
import org.jasig.cas.client.authentication.AttributePrincipal;
import org.jasig.cas.client.util.AssertionHolder;
import org.springframework.beans.factory.annotation.Autowired;
import org.springframework.stereotype.Controller;
import com.gttown.app.user.model.Account;
import com.gttown.app.user.service.AccountService;
@Controller
public class BaseController {
@Autowired
private AccountService accountService;
/**
* 獲取當前登陸用戶帳號信息
*/
public Account getAccount(HttpServletRequest request) {
// String loginaccount =
// AssertionHolder.getAssertion().getPrincipal().getName(); //登陸帳號
//
//
AttributePrincipal principal = (AttributePrincipal) request
.getUserPrincipal();
Map attributes = principal.getAttributes();
// Map attributes2 =
// AssertionHolder.getAssertion().getPrincipal().getAttributes();
//
String id = (String) attributes.get("id");
String uuid = (String) attributes.get("username"); // 惟一key uuid
System.out.println(uuid);
String email = (String) attributes.get("email");
String phonenumber = (String) attributes.get("phonenumber");
Account account = new Account();
account.setId(new Long(id));
account.setEmail(email);
account.setPhonenumber(phonenumber);
account.setUsername(uuid);
return account;
}
}
最後貼上客戶端登陸後 得到的用戶值的效果圖
功夫不負有心人 終於解決這個問題了！ 若是看了個人博客 仍是沒解決 能夠 加扣扣羣 186408628 來 羣裏 @ 我 我就是羣主