Linux網卡配置出錯無法聯網-聯網報錯解決方法

[email protected]:/etc/network# mii-tool eth2: negotiated 1000baseT-FD flow-control, link ok eth3: autonegotiation restarted, no link   發現網卡綁定在eth2和eth3,之前正常應該是綁定在eth0和eht1 ,詢問同事,原來這臺機器之前維修過換了塊主板,導致MA
相關文章
相關標籤/搜索