配置lvs nat模式下real server服務器端lvsrs腳本

由於lvs nat模式下，只有入站方向的流量通過lvs服務器，出站流量直接由Real server服務器響應，因此Real Server服務器必須作相應的配置才能響應客戶數據包，即修改Real server作負載均衡時回包的源地址要改成VIP，另外要修改Real server的arp響應策略，關閉arp響應功能。

#!/bin/bash

#description:start real server

VIP=192.168.12.200

./etc/rc.d/init.d/functions

case "$1" in

   start)

   echo " Start LVS of Real Server "

   /sbin/ifconfig lo:0 $VIP broadcast $VIP netmask 255.255.255.255 up

   echo "1" > /proc/sys/net/ipv4/conf/lo/arp_ignore

   echo "2" > /proc/sys/net/ipv4/conf/lo/arp_announce

   echo "1" > /proc/sys/net/ipv4/conf/all/arp_ignore

   echo "2" > /proc/sys/net/ipv4/conf/all/arp_announce

   ;;

   stop)

   /sbin/ifconfig lo:0 down

   echo "0" > /proc/sys/net/ipv4/conf/lo/arp_ignore

   echo "0" > /proc/sys/net/ipv4/conf/lo/arp_announce

   echo "0" > /proc/sys/net/ipv4/conf/all/arp_ignore

   echo "0" > /proc/sys/net/ipv4/conf/all/arp_announce

   ;;

   *)

   echo "Usage:$0 {start|stop}"

   exit 1

 esac

經過service lvsrs {start|stop}開啓或關閉lvsrs